Abstract:
In this paper the electromagnetic torque developed in permanent magnet synchronous motors is analyzed. Two strategies are discussed for torque ripple minimization. The fi...Show MoreMetadata
Abstract:
In this paper the electromagnetic torque developed in permanent magnet synchronous motors is analyzed. Two strategies are discussed for torque ripple minimization. The first is based on numerical predetermination of the current waveform which is imposed by the control in machine phases to obtain a constant torque. The second is a torque regulation based on its on-line instantaneous estimation. To optimize the current waveform and minimize copper losses, two methods for current modulus minimization are compared. One is relative to the optimal current which leads to a perfect constant instantaneous torque with minimum instantaneous current modulus, and the second concerns only the mean current modulus. Relation between current components and torque reference can be expressed by functions after normalization. These functions optimizing the mean torque are easy to implement and can be used for torque ripple minimization.
Published in: IEEE Transactions on Energy Conversion ( Volume: 14, Issue: 3, September 1999)
DOI: 10.1109/60.790924
Citations are not available for this document.
Cites in Papers - |
Cites in Papers - IEEE (32)
Select All
1.
Peng Yi, Wenzhi Zheng, Xianglin Li, "Overview of Torque Ripple Minimization Methods for Permanent Magnet Synchronous Motors Based on Harmonic Injection", Chinese Journal of Electrical Engineering, vol.10, no.2, pp.16-29, 2024.
2.
Zhaoqian Wu, Qin Liang, Shaohui Zhang, Jinglun Liang, Xiaoqing Yang, "Amplitude-Phase Based Optimal Voltage Harmonic Injection for Speed Harmonic Minimization in SPMSM", IEEE Transactions on Power Electronics, vol.38, no.6, pp.7494-7503, 2023.
3.
Peng Yi, Xinjian Wang, Daolian Chen, Zechang Sun, "PMSM Current Harmonics Control Technique Based on Speed Adaptive Robust Control", IEEE Transactions on Transportation Electrification, vol.8, no.2, pp.1794-1806, 2022.
4.
Shilpa Ranjan, Mini Sreejeth, "Minimisation of Ripples in Torque of Hysteresis Current Controlled PMSM using PI-RES Controller", 2021 2nd International Conference for Emerging Technology (INCET), pp.1-6, 2021.
5.
S. Cai, Z. Q. Zhu, J. C. Mipo, S. Personnaz, "Investigation of Novel Doubly Salient Hybrid Excited Machine With Non-Overlapped Field Winding", IEEE Transactions on Energy Conversion, vol.36, no.3, pp.2261-2275, 2021.
6.
Kai Hu, Guangming Zhang, "Design and Vibration Optimization of Direct Current Motor of Permanent Magnet of Rectangular Magnetic Steel", IEEE Access, vol.8, pp.126606-126614, 2020.
7.
Min-Sik Yoo, Sang Woo Park, Yun-Young Choi, Sang-Heon Han, Young-Doo Yoon, "Current-Scaling Gain Compensation of Motor Drives Under Locked-Rotor Condition Considering Inequality of Phase Resistances", IEEE Transactions on Industry Applications, vol.56, no.5, pp.4915-4923, 2020.
8.
Min-Sik Yoo, Young-Doo Yoon, Byung-Moon Han, Eun-Jea Park, Yun-Young Choi, "Scaling Gain Compensation Method for Current Measurement of Motor Drive Applications Under Locked-Rotor Condition Considering Inequality of Each Phase Resistances", 2018 IEEE Energy Conversion Congress and Exposition (ECCE), pp.4564-4569, 2018.
9.
Hong-Jun Heo, Seon-Ik Hwang, Jang-Mok Kim, Jin-Woo Choi, "Compensating of common scaling current-measurement error for permanent magnet synchronous motor drives", 2016 IEEE 8th International Power Electronics and Motion Control Conference (IPEMC-ECCE Asia), pp.374-378, 2016.
10.
M. Nasir Uddin, Jamshid Khastoo, "Fuzzy Logic-Based Efficiency Optimization and High Dynamic Performance of IPMSM Drive System in Both Transient and Steady-State Conditions", IEEE Transactions on Industry Applications, vol.50, no.6, pp.4251-4259, 2014.
11.
Paavo Rasilo, Marc-Antoine Lemesle, Anouar Belahcen, Antero Arkkio, Marko Hinkkanen, "Comparison of Finite-Element-Based State-Space Models for PM Synchronous Machines", IEEE Transactions on Energy Conversion, vol.29, no.2, pp.535-543, 2014.
12.
Chao Bi, Nay Lin Htun Aung, Cheng Su Soh, Quan Jiang, Hla Nu Phyu, Yinqun Yu, Song Lin, "Influence of Neutral Line to the Optimal Drive Current of PMAC Motors", IEEE Transactions on Magnetics, vol.49, no.6, pp.2483-2488, 2013.
13.
Z. Jabbour, A. Riwan, S. Moreau, Jonathan Van Rhijn, G. Champenois, "Identification and compensation of torque ripples of a PMSM in a haptic context", IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society, pp.1665-1670, 2010.
14.
C. Bi, N. P. Hla, C.S. Soh, Q. Jiang, "An optimal motor drive current model and its application to reluctance motor", The XIX International Conference on Electrical Machines - ICEM 2010, pp.1-6, 2010.
15.
B. Sutthiphornsombat, A. Khoobroo, B. Fahimi, "Mitigation of acoustic noise and vibration in permanent magnet synchronous machines drive using field reconstruction method", 2010 IEEE Vehicle Power and Propulsion Conference, pp.1-5, 2010.
16.
Mostafa Rahimi, Mahmood Momeni, Karim Abbaszadeh, "A new approach to minimize torque pulsations in PMSM driven by field oriented control", SPEEDAM 2010, pp.490-494, 2010.
17.
R. Suja, N. Amuthan, "A Novel Robust Negative High Gain ILC Current Controller for PMSM", 2009 International Conference on Advances in Computing, Control, and Telecommunication Technologies, pp.12-14, 2009.
18.
Sanjib K. Panda, Jian-Xin Xu, Weizhe Qian, "Review of torque ripple minimization in PM synchronous motor drives", 2008 IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century, pp.1-6, 2008.
19.
Jere Kolehmainen, Jouni IkÄheimo, "Motors With Buried Magnets for Medium-Speed Applications", IEEE Transactions on Energy Conversion, vol.23, no.1, pp.86-91, 2008.
20.
Philip B. Beccue, Steven D. Pekarek, Bradley J. Deken, Andreas C. Koenig, "Compensation for Asymmetries and Misalignment in a Hall-Effect Position Observer Used in PMSM Torque-Ripple Control", IEEE Transactions on Industry Applications, vol.43, no.2, pp.560-570, 2007.
21.
Antti Piippo, Jorma Luomi, "Torque Ripple Reduction in Sensorless PMSM Drives", IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics, pp.920-925, 2006.
22.
H.-S. Jung, S.-H. Hwang, J.-M. Kim, C.-U. Kim, C. Choi, "Diminution of Current-Measurement Error for Vector-Controlled AC Motor Drives", IEEE Transactions on Industry Applications, vol.42, no.5, pp.1249-1256, 2006.
23.
Weidong Zhu, B. Fahimi, S. Pekarek, "A field reconstruction method for optimal excitation of permanent magnet synchronous machines", IEEE Transactions on Energy Conversion, vol.21, no.2, pp.305-313, 2006.
24.
Wei Qian, T.A. Nondhal, "Mutual torque ripple suppression of surface-mounted permanent magnet synchronous motor", 2005 International Conference on Electrical Machines and Systems, vol.1, pp.315-320 Vol. 1, 2005.
25.
W. Zhu, B. Fahimi, S. Pekarek, "Optimal excitation of permanent magnet synchronous machines via direct computation of electromagnetic force components", IEEE International Conference on Electric Machines and Drives, 2005., pp.918-925, 2005.
26.
Han-Su Jung, Jang-Mok Kim, Cheul-U Kim, Cheol Choi, "Diminution of current measurement error for vector controlled AC motor drives", IEEE International Conference on Electric Machines and Drives, 2005., pp.551-557, 2005.
27.
P. Beccue, S. Pekarek, B. Fahimi, "Closed-loop control of torsional harmonics in a permanent magnet synchronous machine without use of a position encoder", Twentieth Annual IEEE Applied Power Electronics Conference and Exposition, 2005. APEC 2005., vol.2, pp.954-961 Vol. 2, 2005.
28.
Weizhe Qian, S.K. Panda, J.X. Xu, "Speed ripple minimization in PM synchronous motor using iterative learning control", IEEE Transactions on Energy Conversion, vol.20, no.1, pp.53-61, 2005.
29.
Weizhe Qian, S.K. Panda, Jian-Xin Xu, "Torque ripple minimization in PM synchronous motors using iterative learning control", IEEE Transactions on Power Electronics, vol.19, no.2, pp.272-279, 2004.
30.
Weizhe Qian, S.K. Panda, J.X. Xu, "Torque ripples reduction in PM synchronous motor using frequency-domain iterative learning control", The Fifth International Conference on Power Electronics and Drive Systems, 2003. PEDS 2003., vol.2, pp.1636-1641 Vol.2, 2003.
Cites in Papers - Other Publishers (10)
1.
R. Vidyalakshmi, K. Gaayathry, N. Subha Lakshmi, S. Sundar, M. Suresh, K. Balachander, "An efficient Hardware implementation of modified torque Prescient control scheme for denigration of torque ripple in PMSM", Materials Today: Proceedings, 2021.
2.
Peng Yi, Xinjian Wang, Zechang Sun, "Interior permanent magnet synchronous motor minimum current harmonics torque ripple suppression strategy based on magnetic co-energy model", IET Electric Power Applications, vol.14, no.2, pp.234-244, 2020.
3.
Peng Yi, Zechang Sun, Xinjian Wang, "Research on PMSM harmonic coupling models based on magnetic co-energy", IET Electric Power Applications, vol.13, no.4, pp.571-579, 2019.
4.
Jian Gao, Xuan Wu, Shoudao Huang, WenJuan Zhang, Lei Xiao, "Torque ripple minimisation of permanent magnet synchronous motor using a new proportional resonant controller", IET Power Electronics, vol.10, no.2, pp.208-214, 2017.
5.
Adhavan B, Jagannathan V, "Performance comparison of hysteresis pulse width modulation and space vector pulse width modulation techniques for torque ripple reduction in permanent magnet synchronous motor using iterative learning control", Journal of Vibration and Control, vol.20, no.5, pp.698, 2014.
6.
Vahid Azimi, Mohammad A Nekoui, Ahmad Fakharian, "Robust multi-objective H2/H∞ tracking control based on the Takagi–Sugeno fuzzy model for a class of nonlinear uncertain drive systems", Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, vol.226, no.8, pp.1107, 2012.
7.
S.S. Yang, Y.S. Zhong, "Robust speed tracking of permanent magnet synchronous motor servo systems by equivalent disturbance attenuation", IET Control Theory & Applications, vol.1, no.3, pp.595, 2007.
8.
Marina A. Tsili, Antonios G. Kladas, Pavlos S. Georgilakis, Athanasios T. Souflaris, Dimitris G. Paparigas, "Advanced design methodology for single and dual voltage wound core power transformers based on a particular finite element model", Electric Power Systems Research, vol.76, no.9-10, pp.729, 2006.
9.
Weizhe Qian, S.K. Panda, J.X. Xu, "Periodic speed ripples minimization in PM synchronous motors using repetitive learning variable structure control", ISA Transactions, vol.42, no.4, pp.605, 2003.
10.
Adnan Ansar, Denilson Rodrigues, Jaydev P. Desai, Kostas Daniilidis, Vijay Kumar, Mario F.M. Campos, "Visual and haptic collaborative tele-presence", Computers & Graphics, vol.25, no.5, pp.789, 2001.
