Abstract:
In this paper the electromagnetic torque developed in permanent magnet synchronous motors is analyzed. Two strategies are discussed for torque ripple minimization. The fi...Show MoreMetadata
Abstract:
In this paper the electromagnetic torque developed in permanent magnet synchronous motors is analyzed. Two strategies are discussed for torque ripple minimization. The first is based on numerical predetermination of the current waveform which is imposed by the control in machine phases to obtain a constant torque. The second is a torque regulation based on its on-line instantaneous estimation. To optimize the current waveform and minimize copper losses, two methods for current modulus minimization are compared. One is relative to the optimal current which leads to a perfect constant instantaneous torque with minimum instantaneous current modulus, and the second concerns only the mean current modulus. Relation between current components and torque reference can be expressed by functions after normalization. These functions optimizing the mean torque are easy to implement and can be used for torque ripple minimization.
Published in: IEEE Transactions on Energy Conversion ( Volume: 14, Issue: 3, September 1999)
DOI: 10.1109/60.790924
References is not available for this document.
Select All
1.
C. MARCHAND and A. RAZEK, "Optimal torque operation of digitally controlled permanent magnet synchronous motor drives", IEE Proc-B, vol. 140, no. 3, pp. 232-240, 1993.
2.
T.M. JAHNS and W.L. SOONG, "Pulsating torque minimization techniques for permanent magnet AC motor drives- A review", IEEE Trans. on Ind. Elec., vol. 43, no. 2, pp. 321-330, April 1996.
3.
"Current shapes leading to a constant torque" in Modelling and control of electrical machines: New trends, North Holland:Elsevier Science Publishers B.V., vol. IMACS, pp. 47-52, 1991.
4.
F. BOUILLAULT and C. MARCHAND, "Improvement of servomotors control laws with the help of Finite Element Method", IEEE Trans. on Mag., vol. 31, no. 3, pp. 2020-2025, May 1995.
5.
F. COLAMARTINO, C. MARCHAND and A. RAZEK, "Considerations of non-sinusoidal field distribution in a permanent magnet synchronous motor control", PEVD'94-IEE, pp. 508-513, 1994-October-26.
6.
P. VAS, Vector control of AC machines, New-York:Oxford Press, 1990.
7.
F. COLAMARTINO, C. MARCHAND and A. RAZEK, "Estimation and minimisation of electromagnetic torque ripple in a buried permanent magnet synchronous motor", ICEM'94, pp. 715-719, 1994-September-5‚.
8.
F. COLAMARTINO, Contribution à l'étude de la commande numérique des machines synchrones à aimants permanents. Minimisation des pulsations de couple - Commande sans capteur de position, vol. 6, December 1995.
9.
T.S. LOW, K.J. TSENG, T. LEE, K. LIM and K.S. LOCK, "Strategy for the instantaneous torque control of permanent magnet brushless DC drives", IEE Proc. B Electr. Power Appl., vol. 37, no. 6, pp. 355-363, 1990.
10.
T.S. LOW, K.W. LIM, M.F. RAHMAN and K.J. BINNS, "Comparison of two control strategies in development of high-torque electronically commutated drive", IEE Proc.-B, vol. 139, no. 1, pp. 26-36, 1992-January.
