A 20 GHz Landing Probe Design Based on Pogo-pins | IEEE Conference Publication | IEEE Xplore

- Donate
- Personal Sign In

ADVANCED SEARCH

Conferences >2018 IEEE Symposium on Electr...

A 20 GHz Landing Probe Design Based on Pogo-pins

Download PDF
Download References
Request Permissions
Save to
Alerts

Abstract:

A landing probe design is proposed in this paper based on pogo-pins. Landing probes are usually used to obtain TDR and S-parameters of the device under test (DUT) so that...Show More

Metadata

Abstract:

A landing probe design is proposed in this paper based on pogo-pins. Landing probes are usually used to obtain TDR and S-parameters of the device under test (DUT) so that the performance of the DUT can be evaluated. This design has two major advantages. First, it is durable. Second, it can be easily integrated into automated testing systems. The designed probe works well up to 20 GHz, which is validated by measurement.

Published in: 2018 IEEE Symposium on Electromagnetic Compatibility, Signal Integrity and Power Integrity (EMC, SI & PI)

Date of Conference: 30 July 2018 - 03 August 2018

Date Added to IEEE Xplore: 18 October 2018

ISBN Information:

DOI: 10.1109/EMCSI.2018.8495397

Conference Location: Long Beach, CA, USA

EMC Laboratory, Missouri University of Science and Technology, Enterprise Dr, Rolla, MO, USA

EMC Laboratory, Missouri University of Science and Technology, Enterprise Dr, Rolla, MO, USA

EMC Laboratory, Missouri University of Science and Technology, Enterprise Dr, Rolla, MO, USA

EMC Laboratory, Missouri University of Science and Technology, Enterprise Dr, Rolla, MO, USA

EMC Laboratory, Missouri University of Science and Technology, Enterprise Dr, Rolla, MO, USA

I. Introduction

With the rapid advancement in electronic technologies, the trend of printed circuit board (PCB) and flex designs is moving toward higher and higher frequency and more and more compact form factor. This trend, though brings in various benefits for users, makes the PCB and flex designs more and more vulnerable to signal integrity (SI) [1]–[3] and electromagnetic compatibility (EMC) issues [4], [5].

EMC Laboratory, Missouri University of Science and Technology, Enterprise Dr, Rolla, MO, USA

EMC Laboratory, Missouri University of Science and Technology, Enterprise Dr, Rolla, MO, USA

EMC Laboratory, Missouri University of Science and Technology, Enterprise Dr, Rolla, MO, USA

EMC Laboratory, Missouri University of Science and Technology, Enterprise Dr, Rolla, MO, USA

EMC Laboratory, Missouri University of Science and Technology, Enterprise Dr, Rolla, MO, USA

References is not available for this document.