A current-excited triple-time-voltage oversampling method for bio-impedance model for cost-efficient circuit system

This paper presents a mathematic method and a cost-efficient circuit to measure the value of each component of the bio-impedance model at electrode-electrolyte interface. The proposed current excited triple-time-voltage oversampling (TTVO) method deduces the component values by solving triple simultaneous electric equation (TSEE) at different time nodes during a current excitation, which are the voltage functions of time. The proposed triple simultaneous electric equations (TSEEs) allows random selections of the time nodes, hence numerous solutions can be obtained during a single current excitation. Following that, the oversampling approach is engaged by averaging all solutions of multiple TSEEs acquired after a single current excitation, which increases the practical measurement accuracy through the improvement of the signal-to-noise ratio (SNR). In addition, a print circuit board (PCB) that consists a switched current exciter and an analog-to-digital converter (ADC) is designed for signal acquisition. This presents a great cost reduction when compared against other instrument-based measurement data reported [1]. Through testing, the measured values of this work is proven to be in superb agreements on the true component values of the electrode-electrolyte interface model. This work is most suited and also useful for biological and biomedical applications, to perform tasks such as stimulations, recordings, impedance characterizations, etc.

I. Introduction

The measurement of bio-impedances at the electrode-electrolyte interface is crucial before any stimulus can be applied to the electrodes. Knowing the values of the key components in the bio-impedance model helps to ensure charge balance, maintain stimulus intensity, limit over-potential of the electrode under the water window, prevent tissue damage, and more. The availability of efficient bio-impedance characterizing technologies is therefore vital for bio-stimulation applications.