Loading [MathJax]/extensions/MathMenu.js
Real-Time Trajectory Planning for Autonomous Urban Driving: Framework, Algorithms, and Verifications | IEEE Journals & Magazine | IEEE Xplore

Real-Time Trajectory Planning for Autonomous Urban Driving: Framework, Algorithms, and Verifications


Abstract:

This paper focuses on the real-time trajectory planning problem for autonomous vehicles driving in realistic urban environments. To solve the complex navigation problem, ...Show More

Abstract:

This paper focuses on the real-time trajectory planning problem for autonomous vehicles driving in realistic urban environments. To solve the complex navigation problem, we adopt a hierarchical motion planning framework. First, a rough reference path is extracted from the digital map using commands from the high-level behavioral planner. The conjugate gradient nonlinear optimization algorithm and the cubic B-spline curve are employed to smoothen and interpolate the reference path sequentially. To follow the refined reference path as well as handle both static and moving objects, the trajectory planning task is decoupled into lateral and longitudinal planning problems within the curvilinear coordinate framework. A rich set of kinematically feasible path candidates are generated to deal with the dynamic traffic both deliberatively and reactively. In the meanwhile, the velocity profile generation is performed to improve driving safety and comfort. After that, the generated trajectories are carefully evaluated by an objective function, which combines behavioral decisions by reasoning about the traffic situations. The optimal collision-free, smooth, and dynamically feasible trajectory is selected and transformed into commands executed by the low-level lateral and longitudinal controllers. Field experiments have been carried out with our test autonomous vehicle on the realistic inner-city roads. The experimental results demonstrated capabilities and effectiveness of the proposed trajectory planning framework and algorithms to safely handle a variety of typical driving scenarios, such as static and moving objects avoidance, lane keeping, and vehicle following, while respecting the traffic rules.
Published in: IEEE/ASME Transactions on Mechatronics ( Volume: 21, Issue: 2, April 2016)
Page(s): 740 - 753
Date of Publication: 26 October 2015

ISSN Information:

Funding Agency:

Author image of Xiaohui Li
College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha, China
Xiaohui Li received the B.S. degree in electrical engineering from the Harbin Institute of Technology, Harbin, China, in 2009. He is currently working toward the Ph.D. degree with the College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha, China.
His research activities include the hardware and software architecture design for autonomous ground vehicles. His research inter...Show More
Xiaohui Li received the B.S. degree in electrical engineering from the Harbin Institute of Technology, Harbin, China, in 2009. He is currently working toward the Ph.D. degree with the College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha, China.
His research activities include the hardware and software architecture design for autonomous ground vehicles. His research inter...View more
Author image of Zhenping Sun
College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha, China
Zhenping Sun received the Ph.D. degree in pattern recognition and intelligent system from the College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha, China, in 2004.
He is currently an Associate Professor with the National University of Defense Technology. His research activities include the hardware and software architecture design for autonomous ground vehicles. His rese...Show More
Zhenping Sun received the Ph.D. degree in pattern recognition and intelligent system from the College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha, China, in 2004.
He is currently an Associate Professor with the National University of Defense Technology. His research activities include the hardware and software architecture design for autonomous ground vehicles. His rese...View more
Author image of Dongpu Cao
Department of Automotive Engineering, Cranfield University, Cranfield, U.K.
Dongpu Cao received the Ph.D. degree from Concordia University, Montréal, Canada, in 2008.
He is currently a Lecturer at Center for Automotive Engineering, Cranfield University, Cranfield, U.K. His research interests include electric and hybrid vehicles, vehicle dynamics and control, driver modeling, and intelligent vehicles, where he has contributed more than 80 publications and 1 U.S. patent.
Dr. Cao received the ASME ...Show More
Dongpu Cao received the Ph.D. degree from Concordia University, Montréal, Canada, in 2008.
He is currently a Lecturer at Center for Automotive Engineering, Cranfield University, Cranfield, U.K. His research interests include electric and hybrid vehicles, vehicle dynamics and control, driver modeling, and intelligent vehicles, where he has contributed more than 80 publications and 1 U.S. patent.
Dr. Cao received the ASME ...View more
Author image of Zhen He
College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha, China
Zhen He received the B.S. degree in computer science from Southwest Jiaotong University, Chengdu, China, in 2011 and the M.S. degree in control science and engineering from the National University of Defense Technology, Changsha, China, in 2013, where he is currently working toward the Ph.D. degree.
His research interests include machine learning, statistical modeling, and motion planning.
Zhen He received the B.S. degree in computer science from Southwest Jiaotong University, Chengdu, China, in 2011 and the M.S. degree in control science and engineering from the National University of Defense Technology, Changsha, China, in 2013, where he is currently working toward the Ph.D. degree.
His research interests include machine learning, statistical modeling, and motion planning.View more
Author image of Qi Zhu
College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha, China
Qi Zhu received the B.S. and M.S. degrees in control science and engineering from the College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha, China, in 2011 and 2014, respectively, where he is currently working toward the Ph.D. degree.
His research interests include decision making and motion planning for autonomous ground vehicles under uncertainties as well as human driv...Show More
Qi Zhu received the B.S. and M.S. degrees in control science and engineering from the College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha, China, in 2011 and 2014, respectively, where he is currently working toward the Ph.D. degree.
His research interests include decision making and motion planning for autonomous ground vehicles under uncertainties as well as human driv...View more

I. Introduction and State-of-the-Art

Autonomous driving technologies have great potentials to improve driving safety by reducing traffic accidents and fatalities caused by human errors, enhance driving efficiency by reducing traffic congestion, as well as provide mobility for people who are not able to drive [1]– [3]. Fully autonomous driving is generally identified as the ultimate goal of driver assistance systems in the future [4]. The past three decades have witnessed the significant development of autonomous driving technologies, which have drawn unprecedentedly considerable attention from both academia and industry. Tremendous research efforts have been contributed toward the ambitious goal of realizing fully autonomous driving on realistic roads [5] –[7].

Author image of Xiaohui Li
College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha, China
Xiaohui Li received the B.S. degree in electrical engineering from the Harbin Institute of Technology, Harbin, China, in 2009. He is currently working toward the Ph.D. degree with the College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha, China.
His research activities include the hardware and software architecture design for autonomous ground vehicles. His research interests include artificial intelligence, motion planning, and control for intelligent systems.
Xiaohui Li received the B.S. degree in electrical engineering from the Harbin Institute of Technology, Harbin, China, in 2009. He is currently working toward the Ph.D. degree with the College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha, China.
His research activities include the hardware and software architecture design for autonomous ground vehicles. His research interests include artificial intelligence, motion planning, and control for intelligent systems.View more
Author image of Zhenping Sun
College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha, China
Zhenping Sun received the Ph.D. degree in pattern recognition and intelligent system from the College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha, China, in 2004.
He is currently an Associate Professor with the National University of Defense Technology. His research activities include the hardware and software architecture design for autonomous ground vehicles. His research interests include robotic motion planning and intelligent control of autonomous vehicles.
Zhenping Sun received the Ph.D. degree in pattern recognition and intelligent system from the College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha, China, in 2004.
He is currently an Associate Professor with the National University of Defense Technology. His research activities include the hardware and software architecture design for autonomous ground vehicles. His research interests include robotic motion planning and intelligent control of autonomous vehicles.View more
Author image of Dongpu Cao
Department of Automotive Engineering, Cranfield University, Cranfield, U.K.
Dongpu Cao received the Ph.D. degree from Concordia University, Montréal, Canada, in 2008.
He is currently a Lecturer at Center for Automotive Engineering, Cranfield University, Cranfield, U.K. His research interests include electric and hybrid vehicles, vehicle dynamics and control, driver modeling, and intelligent vehicles, where he has contributed more than 80 publications and 1 U.S. patent.
Dr. Cao received the ASME AVTT2010 Best Paper Award and 2012 SAE Arch T. Colwell Merit Award. He serves as an Associate Editor for IEEE Transactions on Intelligent Transportation Systems, IEEE Transactions On Vehicular Technology, and IEEE Transactions on Industrial Electronics. He has been a Guest Editor for Vehicle System Dynamics, IEEE/ASME Transactions on Mechatronics, and IEEE Transactions on Industrial Informatics. He serves on the SAE International Vehicle Dynamics Standards Committee and a few American Society of Mechanical Engineers, Society of Automotive Engineers, and IEEE technical committees.
Dongpu Cao received the Ph.D. degree from Concordia University, Montréal, Canada, in 2008.
He is currently a Lecturer at Center for Automotive Engineering, Cranfield University, Cranfield, U.K. His research interests include electric and hybrid vehicles, vehicle dynamics and control, driver modeling, and intelligent vehicles, where he has contributed more than 80 publications and 1 U.S. patent.
Dr. Cao received the ASME AVTT2010 Best Paper Award and 2012 SAE Arch T. Colwell Merit Award. He serves as an Associate Editor for IEEE Transactions on Intelligent Transportation Systems, IEEE Transactions On Vehicular Technology, and IEEE Transactions on Industrial Electronics. He has been a Guest Editor for Vehicle System Dynamics, IEEE/ASME Transactions on Mechatronics, and IEEE Transactions on Industrial Informatics. He serves on the SAE International Vehicle Dynamics Standards Committee and a few American Society of Mechanical Engineers, Society of Automotive Engineers, and IEEE technical committees.View more
Author image of Zhen He
College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha, China
Zhen He received the B.S. degree in computer science from Southwest Jiaotong University, Chengdu, China, in 2011 and the M.S. degree in control science and engineering from the National University of Defense Technology, Changsha, China, in 2013, where he is currently working toward the Ph.D. degree.
His research interests include machine learning, statistical modeling, and motion planning.
Zhen He received the B.S. degree in computer science from Southwest Jiaotong University, Chengdu, China, in 2011 and the M.S. degree in control science and engineering from the National University of Defense Technology, Changsha, China, in 2013, where he is currently working toward the Ph.D. degree.
His research interests include machine learning, statistical modeling, and motion planning.View more
Author image of Qi Zhu
College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha, China
Qi Zhu received the B.S. and M.S. degrees in control science and engineering from the College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha, China, in 2011 and 2014, respectively, where he is currently working toward the Ph.D. degree.
His research interests include decision making and motion planning for autonomous ground vehicles under uncertainties as well as human driver behavior modeling.
Qi Zhu received the B.S. and M.S. degrees in control science and engineering from the College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha, China, in 2011 and 2014, respectively, where he is currently working toward the Ph.D. degree.
His research interests include decision making and motion planning for autonomous ground vehicles under uncertainties as well as human driver behavior modeling.View more
Contact IEEE to Subscribe

References

References is not available for this document.