Loading [MathJax]/extensions/MathZoom.js
Application of a Real-Time Data Compression and Adapted Protocol Technique for WAMS | IEEE Journals & Magazine | IEEE Xplore

Application of a Real-Time Data Compression and Adapted Protocol Technique for WAMS


Abstract:

This paper proposes a real-time data compression and adapted protocol technique for wide-area measurement systems (WAMS). The compression algorithm combines exception com...Show More

Abstract:

This paper proposes a real-time data compression and adapted protocol technique for wide-area measurement systems (WAMS). The compression algorithm combines exception compression (EC) with swing door trending (SDT) compression. The compression logic is designed to perform this algorithm in real time. Selection of compression parameters and data reconstruction are presented. An adapted protocol is introduced by improving the format of data frames defined by IEEE standard C37.118 for compressed data packets. The proposed compression technique and protocol were applied to the phasor measurement units (PMUs) of a hydropower plant in Guizhou Power Grid in Southwest China. A low-frequency oscillation incident was recorded by this technique. The raw, compressed and reconstructed data were analyzed to verify the compression and determine the accuracy of the proposed technique. Also, the wavelet-based data compression, the standalone EC and SDT are compared with the proposed compression technique. Our results demonstrated that this compression can reach the compression ratios in the range of 6 to 11. Also, this compression and adapted protocol technique can reduce the size of data packets by approximately 75% with high accuracy in both dynamic and steady states.
Published in: IEEE Transactions on Power Systems ( Volume: 30, Issue: 2, March 2015)
Page(s): 653 - 662
Date of Publication: 01 July 2014

ISSN Information:

No metrics found for this document.

I. Introduction

Wide-Area measurement systems (WAMS) are becoming one of the most important monitoring systems for power systems. In contrast to supervisory control and data acquisition (SCADA) systems, WAMS provide synchronized phasor measurements with considerably higher reporting rates. The implementation of WAMS over the past 10 years has demonstrated their value for dynamic monitoring, system modeling and validation, closed-loop control, and wide-area protection [1]. However, their high reporting rates and numerous data channels result in large amounts of data, which need to be transported in communication systems and stored in control centers, measuring units, and application servers in real time [2], [3].

Usage
Select a Year
2025

View as

Total usage sinceJul 2014:1,842
02468101214JanFebMarAprMayJunJulAugSepOctNovDec8131000000000
Year Total:22
Data is updated monthly. Usage includes PDF downloads and HTML views.
Contact IEEE to Subscribe

References

References is not available for this document.