Abstract:
We have developed a precise and high-speed arm applied to assembly processes in electrical product and machine industries. The arm is designed based on the requirement fr...Show MoreMetadata
Abstract:
We have developed a precise and high-speed arm applied to assembly processes in electrical product and machine industries. The arm is designed based on the requirement from Japanese major industries. The paper addresses the background of the development, the required specification for the robot arm, and the brief introduction of the prototype arm and evaluations of accuracy. We test the repeatability of parallel mechanism. Then we calibrate the kinematic model of parallel mechanism to improve its absolute accuracy using laser tracking coordinate measuring system.
Published in: Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146)
Date of Conference: 20-20 May 1998
Date Added to IEEE Xplore: 06 August 2002
Print ISBN:0-7803-4300-X
Print ISSN: 1050-4729
Citations are not available for this document.
Cites in Papers - |
Cites in Papers - IEEE (25)
Select All
1.
Paolo Franceschi, Nicola Castaman, Stefano Ghidoni, Nicola Pedrocchi, "Precise Robotic Manipulation of Bulky Components", IEEE Access, vol.8, pp.222476-222485, 2020.
2.
Hyun-Su Kim, Kwang-Hee Lee, Tae-Yong Kuc, Seon-Je Yang, Kyung-Tae Nam, "A Novel Control Method to Change Motion of 3DOF Parallel Robot Immediately and Flexibly", 2019 19th International Conference on Control, Automation and Systems (ICCAS), pp.1674-1678, 2019.
3.
Mehmet Alper Ergin, Angelika Peer, "Development of a new 6 DOF parallel haptic interface for the rendering of elements and interior equipment in a car", 2013 IEEE RO-MAN, pp.238-244, 2013.
4.
Weidong Wang, Litao Zhang, Junlin Ma, "Kinematic calibration of 6-UPS surgical parallel robot", 2013 ICME International Conference on Complex Medical Engineering, pp.369-374, 2013.
5.
Kiyoshi Nagai, Tam Nhat Le, Yoshikatsu Hayashi, Koji Ito, "Kinematical analysis of redundant drive wire mechanisms with velocity constraint", 2012 IEEE International Conference on Mechatronics and Automation, pp.1496-1501, 2012.
6.
Kiyoshi Nagai, Tam Nhat Le, Yoshikatsu Hayashi, Koji Ito, "Proposal of a Redundant Drive Wire Mechanism for producing motions with high acceleration and high precision", 2011 IEEE/SICE International Symposium on System Integration (SII), pp.1049-1054, 2011.
7.
Jianzheng Zhang, Hongnian Yu, Feng Gao, Xianchao Zhao, "Key issues in studying parallel manipulators", The 2011 International Conference on Advanced Mechatronic Systems, pp.234-244, 2011.
8.
Weiwei Shang, Shuang Cong, Yuan Ge, "Kinematic self-identification of a redundantly actuated parallel manipulator using differential evolution", 2010 8th World Congress on Intelligent Control and Automation, pp.6654-6659, 2010.
9.
Kiyoshi Nagai, Zhengyong Liu, "Re-design of force redundant parallel mechanisms by introducing kinematical redundancy", 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.5898-5904, 2009.
10.
Cheng Gang, Ge Shi-rong, Jiang Shi-lei, "Error Analysis and Kinematic Calibration of 3-RPS Symmetrical Parallel Bionic Leg", 2009 Fifth International Conference on Natural Computation, vol.2, pp.547-551, 2009.
11.
Kiyoshi Nagai, Zhengyong Liu, "Introducing kinematical redundancy into parallel mechanism with force redundancy", 2008 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pp.534-539, 2008.
12.
Chunshi Feng, Shuang Cong, Yaoxin Zhang, Zexiang Li, Silong Jiang, "Kinematic parameters calibration of redundant planar 2-dof parallel manipulator with a new error function", 2008 7th World Congress on Intelligent Control and Automation, pp.426-431, 2008.
13.
Yu Lingtao, Wang Jian, Du Zhijiang, Sun Lining, Cai Hegao, "A Novel Method on Parallel Robot's Pose Measuring and Calibration", 2007 2nd IEEE Conference on Industrial Electronics and Applications, pp.1292-1296, 2007.
14.
Junhong Ji, Lining Sun, Lingtao Yu, "A New Pose Measuring and Kinematics Calibrating Method for Manipulators", Proceedings 2007 IEEE International Conference on Robotics and Automation, pp.4925-4930, 2007.
15.
Joseph Wong, Goldie Nejat, Robert G. Fenton, Beno Benhabib, "Localization of Autonomous Robotic Vehicles Using A Neural-Network Approach", 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.448-453, 2006.
16.
W. Tanaka, T. Arai, K. Inoue, T. Takubo, Choong Sik Park, "Calibration method for parallel mechanism using micro grid pattern", Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006., pp.763-768, 2006.
17.
G. Nejat, B. Benhabib, "Line-of-sight task-space sensing methodology for the localization of robotic end-effectors", IEEE/ASME Transactions on Mechatronics, vol.11, no.2, pp.225-232, 2006.
18.
P. Renaud, N. Andreff, J.-M. Lavest, M. Dhome, "Simplifying the kinematic calibration of parallel mechanisms using vision-based metrology", IEEE Transactions on Robotics, vol.22, no.1, pp.12-22, 2006.
19.
G. Nejat, B. Benhabib, "Continuous guidance for the docking of autonomous vehicles using active task-space sensing", IEEE International Conference Mechatronics and Automation, 2005, vol.1, pp.119-124 Vol. 1, 2005.
20.
W. Tanaka, T. Arai, K. Inoue, T. Takubo, Y. Mae, Y. Koseki, "Workspace analysis of parallel mechanism with adjustable link parameters", ICAR '05. Proceedings., 12th International Conference on Advanced Robotics, 2005., pp.202-207, 2005.
21.
G. Nejat, B. Benhabib, A. Membre, "Active Task-Space Sensing and Localization of Autonomous Vehicles", Proceedings of the 2005 IEEE International Conference on Robotics and Automation, pp.3770-3775, 2005.
22.
Jingjun Yu, Shusheng Bi, Guanghua Zong, Xin-Jun Liu, "On the design of compliant-based micro-motion manipulators with a nanometer range resolution", Proceedings 2003 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2003), vol.1, pp.149-154 vol.1, 2003.
23.
P. Renaud, N. Andreff, M. Dhome, P. Martinet, "Experimental evaluation of a vision-based measuring device for parallel machine-tool calibration", IEEE/RSJ International Conference on Intelligent Robots and Systems, vol.2, pp.1868-1873 vol.2, 2002.
24.
W. Tanaka, T. Arai, K. Inoue, Y. Mae, Choong Sik Park, "Simplified kinematic calibration for a class of parallel mechanism", Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292), vol.1, pp.483-488 vol.1, 2002.
25.
C.G. Iurascu, F.C. Park, "Geometric algorithms for closed chain kinematic calibration", Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C), vol.3, pp.1752-1757 vol.3, 1999.
Cites in Papers - Other Publishers (12)
1.
W. Dharmalingum, J. Padayachee, J. Collins, G. Bright, "The Development and Inverse Kinematics of a 5 DOF Parallel Kinematic Architecture Machining System", Smart, Sustainable Manufacturing in an Ever-Changing World, pp.763, 2023.
2.
Elio Hajj Assaf, Cornelius von Einem, Cesar Cadena, Roland Siegwart, Florian Tschopp, "High-Precision Low-Cost Gimballing Platform for Long-Range Railway Obstacle Detection", Sensors, vol.22, no.2, pp.474, 2022.
3.
Paolo Franceschi, nicola castaman, "Combining visual and force feedback for the precise robotic manipulation of bulky components", Multimodal Sensing and Artificial Intelligence: Technologies and Applications II, pp.33, 2021.
4.
Mohsen Heydarzadeh, Nima Karbasizadeh, Mehdi Tale Masouleh, Ahmad Kalhor, "Experimental kinematic identification and position control of a 3-DOF decoupled parallel robot", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol.233, no.5, pp.1841, 2019.
5.
J. Conte, A. C. Majarena, R. Acero, J. Santolaria, J. J. Aguilar, "Performance evaluation of laser tracker kinematic models and parameter identification", The International Journal of Advanced Manufacturing Technology, vol.77, no.5-8, pp.1353, 2015.
6.
Chun Xia Zhu, Ji Man Luo, Bin Li, "Research on Deformation Error of Links of Parallel Robot", Advanced Materials Research, vol.295-297, pp.781, 2011.
7.
Chun Xia Zhu, Li Wen Guan, Li Ping Wang, "Effect Study on Deformation of Links to Error of Parallel Manipulator", Advanced Materials Research, vol.97-101, pp.3737, 2010.
8.
Yaoxin Zhang, Shuang Cong, Zexiang Li, Shilong Jiang, "Auto-calibration of a redundant parallel manipulator based on the projected tracking error", Archive of Applied Mechanics, vol.77, no.10, pp.697, 2007.
9.
Pierre Renaud, Andres Vivas, Nicolas Andreff, Philippe Poignet, Philippe Martinet, François Pierrot, Olivier Company, "Kinematic and dynamic identification of parallel mechanisms", Control Engineering Practice, vol.14, no.9, pp.1099, 2006.
10.
Goldie Nejat, Beno Benhabib, "Short-range guidance of autonomous vehicles—a comparative study", Robotics and Computer-Integrated Manufacturing, vol.21, no.4-5, pp.401, 2005.
11.
Jay il Jeong, Dongsoo Kang, Young Man Cho, Jongwon Kim, "Kinematic Calibration for Redundantly Actuated Parallel Mechanisms", Journal of Mechanical Design, vol.126, no.2, pp.307, 2004.
12.
C. C. Iuraşcu, F. C. Park, "Geometric Algorithms for Kinematic Calibration of Robots Containing Closed Loops", Journal of Mechanical Design, vol.125, no.1, pp.23, 2003.
