Abstract:
The Rayleigh-Taylor Mix (RTMIX) project will attempt to diagnose and understand the growth of a mixing layer at the interface between an imploding metal liner and a polys...Show MoreMetadata
Abstract:
The Rayleigh-Taylor Mix (RTMIX) project will attempt to diagnose and understand the growth of a mixing layer at the interface between an imploding metal liner and a polystyrene foam core in a series of pulsed power experiments on the Pegasus capacitor bank. Understanding the effects of material strength will be an important part of the study. During the initial phase of the implosion, the liner/foam interface is Rayleigh-Taylor (RT) stable; however, as the foam is compressed, it decelerates the liner causing it to bounce and to go RT unstable. In this paper, we report 1D and 2D MHD simulations and preliminary results from the first experiment in the series.
Published in: Digest of Technical Papers. 11th IEEE International Pulsed Power Conference (Cat. No.97CH36127)
Date of Conference: 29 June 1997 - 02 July 1997
Date Added to IEEE Xplore: 06 August 2002
Print ISBN:0-7803-4213-5
Development of a Wireless Pressure Measurement System Using Interdigitated Capacitors
Khalil I. Arshak,Deirdre Morris,Arousian Arshak,Olga Korostynska,Essa Jafer
Inner gas pressure measurement based life-span estimation of electrolytic capacitors
A. Riz,D. Fodor,O. Klug,Z. Karaffy
Fatigue Life Predictive Model and Acceleration Factor Development for Decoupling Capacitors
Krishna Tunga,Joseph Ross,Kamal Sikka,Thomas Lombardi,Bakul Parikh,Eric Turcotte,Catherine Dufort,David Turnbull
High acceleration testing of high energy density capacitors
Fred MacDougall,Jason Cahayla,Joel Ennis,Xiao Hui Yang,Mark Schneider,J. Ross MacDonald
Modified Gyrator–Capacitor Model for Circuit Simulation
Sam Ben-Yaakov,Yivgeni Semidotskih
Virtual Laboratory Work “Pressure Measurement in a Closed-Loop Pneumatic System” in a Graphical Programming Environment
Samuil Gusselnikov,Anna V. Tsareva
Printing and scaling of metallic traces and capacitors using a laboratory-scale rotogravure press
Alejandro de la Fuente Vornbrock,Jau M. Ding,Donovan Sung,Huai-Yuan Tseng,Vivek Subramanian
Comparative analysis between the classic power capacitors model used in simulations and the real power capacitors response tested in a controlled laboratory environment
Alexandre Moriel da Silva,Mário Oleskovicz,Ricardo Augusto Souza Fernandes
A feasibility study of the classical computational model used to represent power capacitors by comparing the simulation response and the real power capacitors response tested in a controlled laboratory environment
Alexandre Moriel da Silva,Mário Oleskovicz,Ricardo Augusto Souza Fernandes,Flavio Resende Garcia
