Loading [MathJax]/extensions/MathMenu.js
Guided acoustic wave propagation for porcelain coating characterization | IEEE Journals & Magazine | IEEE Xplore

Guided acoustic wave propagation for porcelain coating characterization


Abstract:

In this paper a measurement technique to obtain dispersion curves for guided acoustic modes in porcelain-coated steel is described. The measurement is performed with two ...Show More

Abstract:

In this paper a measurement technique to obtain dispersion curves for guided acoustic modes in porcelain-coated steel is described. The measurement is performed with two angled ultrasonic longitudinal transducers in a pitch catch configuration by employing an immersion technique. Phase velocities for the guided modes are selected through the variation of the angle formed by the transmitter beam with the surface normal vector. The excitation signal of the transmitting transducer is a narrow band pulse. For each phase velocity, the guided mode frequencies are recovered by evaluating the frequency minima of the reflection coefficient.
Page(s): 909 - 916
Date of Publication: 31 July 1997

ISSN Information:

References is not available for this document.

Select All
1.
J. L. Rose, A. Pilarski and J. J. Ditri, "Ultrasonic NDE guided wave mode selection principles", Proc. Ultrasonics International 93, pp. 255-264, 1994.
2.
A. Pilarski and J. L. Rose, "Lamb wave mode selection concepts for interfacial weakness analysis", J. Non-Destr. Eval., vol. 11, no. 3, pp. 237-248, 1992.
3.
B. A. Auld, Acoustic Fields and Waves in Solid, New York:Wiley, vol. II, 1973.
4.
E. L. Adler, "Matrix methods applied to acoustic waves in multilayers", IEEE Trans. Ultrason. Ferroelect. Freq. Contr., vol. 37, pp. 485-490, 1990.
5.
A. Fort and V. Vignoli, "Guided acoustic propagation modelling for platelike multilayered structures", Acustica, vol. 80, pp. 543-553, 1994.
6.
A. H. Nayfeh and D. E. Chimenti, "Ultrasonic wave reflection from liquid coupled orthotropic plates with application to fibrous composites", J. Appl. Mech., vol. 55, pp. 863-870, 1988.
7.
T. Pialucha and P. Cawley, "An investigation of the accuracy of oblique incidence ultrasonic reflection coefficient measurements", J. Acoust. Soc. Amer., vol. 96, pp. 1651-1660, 1994.
8.
C. H. Yang and D. E. Chimenti, "Guided plate waves immersed in piezoelectrics in a dielectric fluid. II. Experiments", J. Acoust. Soc. Amer., vol. 97, pp. 2110-2115, 1995.
9.
P. C. Xu, K. E. Lindenschmidt and S. A. Meguld, "A new high frequency analysis of coatings using leaky Lamb waves", J. Acoust. Soc. Amer., vol. 95, pp. 2954-2962, 1993.
10.
M. de Billy, L. Adler and G. Quentin, "Measurements of backscattered leaky Lamb waves in plates", J. Acoust. Soc. Amer., vol. 75, pp. 998-1001, 1984.
11.
D. Alleyne and P. Cawley, "A two-dimensional Fourier transform method for the measurement of propagating multimode signals", J. Acoust. Soc. Amer., vol. 89, pp. 1159-1168, 1991.
12.
R. D. Costley Jr. and Y. H. Berthelot, "Dispersion curve analysis of laser-generated Lamb waves", Ultrasonics, vol. 32, pp. 249-253, 1994.
13.
L. Noui and R. J. Dewhurst, "A laser beam deflection technique for the quantitative detection of ultrasonic Lamb waves", Ultrasonics, vol. 31, pp. 425-432, 1993.
14.
G. Carlotti, D. Fioretto, L. Palmieri, G. Socino, L. Verdini and E. Verona, "Brillouen scattering by surface acoustic modes for elastic characterization of ZnO films", IEEE Trans. Ultrason. Ferroelect. Freq. Contr., vol. 38, pp. 56-60, 1991.
15.
R. M. White and F. W. Voltmer, "Direct piezoelectric coupling to surface elastic waves", Appl. Phys. Lett., vol. 7, pp. 314-316, 1965.
16.
L. Adler, M. de Billy, G. Quentin, M. Talmant and P. B. Nagy, "Evaluation of friction-welded aluminum-steel bonds using dispersive guided modes of a layered substrate", J. Appl. Phys., vol. 68, pp. 6072-6076, 1990.
17.
R. T. Ko and L. Adler, "Evaluation of interfacial properties in isotropic and anisotropic layer substrates", Proc. Ultrasonics International 93, pp. 375-383, 1993.
18.
"The utility of guided waves in the ultrasonic nondestructive evaluation of composite materials in nondestructive testing", Proc. 12th World Conf. NDT, vol. II, pp. 1567-1571, 1989.
19.
A. Salomoni, R. Ferrari, I. Stamenkovic, F. Rossi and L. Esposito, "Correlation among mechanical and thermal properties of vitreous enamel coatings on steel plates", Proc. XVII International Enamellers Congress, 1995-May-1.
20.
L. Cremer, "Theory of sound damming by thin walls", Akust. Z., vol. 7, pp. 1-17, 1952.
21.
D. E. Chimenti and S. I. Rokhlin, "Relationship between leaky Lamb modes and reflection coefficient zeroes for a fluid-coupled elastic layer", J. Acoust. Soc. Amer., vol. 88, pp. 1603-1611, 1990.
22.
R. Fiorito, W. Madigosky and H. Überall, "Resonance theory of acoustic waves interacting with an elastic plate", J. Acoust. Soc. Amer., vol. 66, pp. 1857-1866, 1979.
23.
E. Biagi, A. Fort, L. Masotti and L. Ponziani, "High frequency ultrasonic investigation for ceramic materials to test the manufacturing process", Res. Non-Destr. Eval., vol. 6, pp. 209-218, 1995.

References

References is not available for this document.