Abstract:
The control parameters of the industrial controller should be tuned to match the characteristics of the controlled system, at installation and even during operation. Howe...Show MoreMetadata
Abstract:
The control parameters of the industrial controller should be tuned to match the characteristics of the controlled system, at installation and even during operation. However, many existing controllers can not complete this task themselves. An expert's intervention is usually expected. A control parameter optimization algorithm based on the orthogonal test approach is described in this paper. This algorithm has been implemented in a synthesis test instrument and successfully integrated into a microcomputer-based hydro-turbine governor. The efficiency of this algorithm has been proved by field test results.
Published in: IEEE Transactions on Energy Conversion ( Volume: 12, Issue: 4, December 1997)
DOI: 10.1109/60.638956
References is not available for this document.
Select All
1.
S. Wei and G. Xu, "Orthogonal test approach and optimal parameter selection", Hydro Electric Equipments, 1982.
2.
L. Ye, S. Wei, Z. Li, O.P. Malik, G.S. Hope and G.C. Hancock, "An intelligent self-improving control strategy and its microprocessor-based implementation to a hydro-turbine governing system", Canadian Journal of Electrical and Computer Engineering, vol. 15, no. 4, pp. 130-138, 1990.
3.
Z. Li, L. Ye, S. Wei, O.P. Malik, G.S. Hope and G.C, Hancock, "Field tests with a prototype duplicate microprocessor-based governor for a hydro-turbine", IEEE Transactions on Energy Conversion, vol. 6, no. 3, pp. 349-355, 1991.
4.
Orthogonal test approach, People's Education Press, 1975.
5.
Z. Li, "Automatic test techniques of hydro-turbine governors", Large Electric Machine and Hydraulic Turbine, vol. 140, no. 1, 1996.
