Abstract:
To extend the widespread use of the high performance parallel interface (HIPPI) as a networking solution for high-speed communications, the 25-meter distance limitation m...Show MoreMetadata
Abstract:
To extend the widespread use of the high performance parallel interface (HIPPI) as a networking solution for high-speed communications, the 25-meter distance limitation must be solved. Three options available for alleviating the problem of distance limitation are serial-HIPPI, HIPPI/SONET mapping or HIPPI-ATM mapping, and IP routing. Serial-HIPPI, HIPPI/SONET mapping and HIPPI-ATM mapping provide extended HIPPI connectivities at the physical layer, while IP routing forwards data between the HIPPI networks and other networks at the network layer. We study two feasible solutions of this problem, HIPPI tunneling (HIPPI-ATM mapping) and IP routing. We compare these two schemes in terms of network connectivities, protocol overhead, and flow control. The performance evaluation of one implementation of HIPPI tunneling and IP routing is presented. The experimental performance suggests that a high degree of bandwidth utilization was achieved by both HIPPI tunneling and IP routing in this implementation.
Date of Conference: 24-28 March 1996
Date Added to IEEE Xplore: 06 August 2002
Print ISBN:0-8186-7293-5
Print ISSN: 0743-166X
References is not available for this document.
Select All
1.
J. D. Cavanaugh, Protocol Overhead in IP/ATM Networks, Aug. 1994.
2.
B. Chinoy and K. Fall, "TCP/IP and HIPPI Performance in the CASA Gigabit Testbed", In USENIX High-Speed Networking Symposium, pp. 45, 1994-Aug.
3.
Serial HIPPI Specification Revision 1.0, May 1991.
4.
J. P. Hughes and W. R. Franta, "Geographical Extension of HIPPI Channels via High Speed SONET", IEEE Network, pp. 42-53, May/June 1994.
5.
GigaRouter System Description Revision 2, Dec. 1994.
6.
V. Jacobson, R. Braden and D. Borman, TCP Extensions for High Performance, May 1992.
7.
High Performance Networking at Long Distances, [online] Available: http://jugglcr.lanl.gov/lanp/gateway-info.html.
9.
D. Tolmie and J. Renwick, "HIPPI: Simplicity Yields Success", IEEE Network, pp. 28, Jan. 1993.
10.
"ANSI X3.183-1991 (HIPPI-PH), X3.210-199x (HIPPI-FP), X3.218-199X (HIPPI-LE) and X3.222-199x (HIPPI-SC) American National Standard Institute, Inc.", High-Performance Parallel Interface, June 1991.
11.
"ANSI X3T11 American National Standard for Information Systems", High-Performance Parallel Interface -Mapping to Asynchronous Transfer Mode, Feb. 1995.
12.
K. C. Young, C. A. Johnston, D. J. Smith, J. W. Mann, J. J. DesMarais, M. Z. Iqbal, et al., "A HIPPI/ATM/SONET Network Interface for the Nectar Gigabit Testbed", LEOS 1003 Summer Topical Meeting Digest on Gigabit Networks, pp. 14, 1993-July.