Abstract:
Conventional techniques and new techniques based on digitizing instruments for making high-frequency B-versus-H loop and core-loss measurements on magnetic cores are pres...Show MoreMetadata
First Page of the Article
Abstract:
Conventional techniques and new techniques based on digitizing instruments for making high-frequency B-versus-H loop and core-loss measurements on magnetic cores are presented and compared. Potential sources of measurement errors and their magnitudes, limitations imposed by the instrumentation, and thermal considerations are discussed. Circuits suitable for high-frequency sine-wave or square-wave core excitation are also discussed. The utility of such measurements is illustrated with sample data.<>
Published in: IEEE Transactions on Power Electronics ( Volume: 5, Issue: 1, January 1990)
DOI: 10.1109/63.45998
First Page of the Article
References is not available for this document.
Select All
1.
J. T. Triner, Analytical core loss calculations for magnetic materials used in high frequency high power converter applications, Aug. 1979.
2.
D. Y. Chen, "Comparison of High Frequency Magnetic Core Losses Under Two Different Driving Conditions: A Sinusoidal and a Square-Wave Voltage", IEEE Power Electronics Specialists Conf. Rec., pp. 237-241, 1978.
3.
W. E. Babcock, "A Simplified Method of Determining High-Frequency Characteristics of Magnetic Core Materials", Ρroc. Powercon 10, 1983.
4.
V. J. Thottuvelil, T. G. Wilson, I. Miyazaki and H. A. Owen, "High-frequency characteristics of amorphous metallic-alloy tape-wound cores", IEEE Power Electronics Specialists Conf. Rec., pp. 168-180, 1983.
5.
H. W. Lord, "Dynamic Hysteresis Loop Measuring Equipment", Trans. AIEE, vol. 71, pp. 269-272, 1952.
6.
M. Blundell, K. J. Overshott and C. D. Graham, "Core loss measurements in amorphous alloys", Appl. Phys., vol. 50, no. 3, pp. 1598-1600, Mar. 1979.
7.
V. J. Thottuvelil, High-frequency magnetic-core measurements for power-conditioning systems with emphasis on amorphous metallic-alloy tape-wound cores, Sept. 1984.
8.
F. Kreith and W. Z. Black, Basic Heat Transfer, New York:Harper Row, pp. 70-72, 1980.
