Abstract:
This paper outlines a novel procedure for the design of end-coupled microstrip bandpass filters at near mm-wave frequencies. It presents results obtained for a fabricated...Show MoreMetadata
Abstract:
This paper outlines a novel procedure for the design of end-coupled microstrip bandpass filters at near mm-wave frequencies. It presents results obtained for a fabricated 28.76GHz filter which yielded an insertion loss of 2.3dB in the passband and 30dB rejection at 4% below the centre frequency. The performance of this filter was superior to that of a conventional parallel-coupled filter designed for the same purpose.
Published in: 1989 19th European Microwave Conference
Date of Conference: 04-07 September 1989
Date Added to IEEE Xplore: 19 March 2007
References is not available for this document.
Select All
1.
Pilgrim and Searle, "mm-Wave Direct-To-Home Multichannel TV Delivery System", IEEE MTT-S 1989 International Symposium Digest.
2.
Y. Matthaei and Jones, Microwave Filters Impedance Matching Networks and Coupling Structures, McGraw-Hill, pp. 427-446, 1964.
3.
Cohn, "Direct-Coupled Resonator Filters", Proc. IRE, vol. 45, pp. 187-196, Feb. 1957.
4.
Edwards, Foundations For Microstrip Circuit Design, Wiley, 1981.
5.
TOUCHSTONE Reference Manual.
6.
Hammerstad and Bekkadal, Microstrip Handbook, pp. 91-92, 1975.
