Abstract:
The transient response of an erbium-doped fiber amplifier (EDFA) pumped at 1.48 μm, taking into account the gain-saturation effects due to the amplified spontaneous emiss...Show MoreMetadata
Abstract:
The transient response of an erbium-doped fiber amplifier (EDFA) pumped at 1.48 μm, taking into account the gain-saturation effects due to the amplified spontaneous emission (ASE), is studied theoretically and experimentally. The theoretical model is used to predict the gain saturation and recovery times of an EDFA and its effects to the amplification of optical pulses.
Published in: IEEE Photonics Technology Letters ( Volume: 6, Issue: 12, December 1994)
DOI: 10.1109/68.392219
Keywords assist with retrieval of results and provide a means to discovering other relevant content. Learn more.
- IEEE Keywords
- Index Terms
- Transient State ,
- Optical Amplifier ,
- Erbium-doped Fiber ,
- Recovery Time ,
- Optical Pulse ,
- Saturation Effect ,
- Amplified Spontaneous Emission ,
- Gain Saturation ,
- Optical Fiber ,
- Partial Differential ,
- Signal Power ,
- Characteristic Time ,
- Pulse Duration ,
- Peak Power ,
- Repetition Frequency ,
- Pump Power ,
- Pumping Rate ,
- Input Pulse ,
- Gain Bandwidth ,
- Fiber Input ,
- Output End ,
- Population Inversion ,
- Input End ,
- High Peak Power ,
- High-power Pulse ,
- Transient Variation
Keywords assist with retrieval of results and provide a means to discovering other relevant content. Learn more.
- IEEE Keywords
- Index Terms
- Transient State ,
- Optical Amplifier ,
- Erbium-doped Fiber ,
- Recovery Time ,
- Optical Pulse ,
- Saturation Effect ,
- Amplified Spontaneous Emission ,
- Gain Saturation ,
- Optical Fiber ,
- Partial Differential ,
- Signal Power ,
- Characteristic Time ,
- Pulse Duration ,
- Peak Power ,
- Repetition Frequency ,
- Pump Power ,
- Pumping Rate ,
- Input Pulse ,
- Gain Bandwidth ,
- Fiber Input ,
- Output End ,
- Population Inversion ,
- Input End ,
- High Peak Power ,
- High-power Pulse ,
- Transient Variation
