Abstract:
The authors present a frequency-domain model for the accurate and efficient prediction of harmonic torque pulsations in three-phase VSI/induction motor drives, which enab...Show MoreMetadata
Abstract:
The authors present a frequency-domain model for the accurate and efficient prediction of harmonic torque pulsations in three-phase VSI/induction motor drives, which enables rapid consideration to be given to their potentially harmful effects in producing uneven shaft rotation. A detailed analysis is provided for both quasi-square wave (QSW) and optimal pulse-width modulated (PWM) modes of switching operation, with the latter technique designed to improve the low-speed drive performance by eliminating low-order harmonic components. A comparison is made with practical results obtained from an experimental 0.56 kW drive and from a comprehensive time-domain model using a numerical solution of the machine equations. It is shown that accurate prediction of the actual performance is provided.<>
Published in: IEEE Transactions on Industrial Electronics ( Volume: 40, Issue: 6, December 1993)
DOI: 10.1109/41.245893
References is not available for this document.
Select All
1.
S. R. Bowes and R. Bullough, "Steady-state performance of current-fed pulse-width-modulated inverter drives", IEE Proc. Pt. B, vol. 131, no. 3, pp. 113-132, May 1984.
2.
S. R. Bowes and R. Bullough, "Fast modelling techniques for microprocessor-based optimal pulse-width-modulated control of current-fed inverter drives", IEE Proc. Pt. B, vol. 131, no. 4, pp. 149-158, July 1984.
3.
T. H. Chin and H. Tomita, "The principles of eliminating pulsating torque in current source inverter induction motor system", IEEE Trans. Ind. Appl., vol. IA-17, pp. 160-166, Mar./Apr. 1981.
4.
C. Namuduri and P. C. Sen, "Pulsewidth modulation for current source inverters", IEEE Trans. Ind. Appl., vol. IA-22, pp. 1052-1072, Nov./Dec. 1986.
5.
J. S. Hsu and A. M. A. Amin, "Torque calculations of current-source induction machines using the 1-2-0 coordinate system", IEEE Trans. Ind. Electron., vol. 37, pp. 34-40, Feb. 1990.
6.
J. Zubek, "Evaluation of techniques for reducing shaft cogging in current-fed AC drives", IEEE IAS Conf. Record, pp. 517-524, 1978.
7.
T. A. Lipo, "Analysis and control of torque pulsations in current-fed induction motor drives", IEEE Power Specialists Conf. Record, pp. 89-96, 1978.
8.
F. C. Zach, R. Matrinez, S. Keplinger and A. Seister, "Dynamically optimal switching patterns for PWM inverter drives (for minimization of the torque and speed ripples)", IEEE Trans. Ind. Appl., vol. IA-21, pp. 975-986, July/Aug. 1985.
9.
T. A. Lipo, P. R. Krause and Η. E. Jordan, "Harmonic torque and speed pulsations in a rectifier-inverter induction motor drive", IEEE Trans. Power Appl. and Sys., vol. PAS-88, pp. 579-587, May 1969.
10.
S. D. T. Robertson and Κ. M. Hebber, "Torque pulsation in induction motors with inverter drives", IEEE Trans. Ind. Gen. Appl., vol. IGA-7, pp. 318-323, Mar./Apr. 1971.
11.
J. Hindmarsh, Electrical Machines and Drives, New York:Pergamon, 1985.
12.
S. M. Abdulrahman, New optimal PWM strategies for a VSI induction motor drive, Nov. 1991.
