Conferences >IEEE 34th Annual Conference o...

Output filter design for a grid-interconnected three-phase inverter

Download PDF
Download References
Request Permissions
Save to
Alerts

Abstract:

Traditionally, LC filter is used for an inverter power supply. A grid-interconnected inverter, however, has some unique requirements that an LC filter may not be sufficie...Show More

Metadata

Abstract:

Traditionally, LC filter is used for an inverter power supply. A grid-interconnected inverter, however, has some unique requirements that an LC filter may not be sufficient. This paper comprehensively discusses the design considerations of the output filter for the grid-interconnected inverter. Different passive damping filter solutions are compared and the optimized design guidelines are also proposed. Simulation results are provided to validate the design.

Published in: IEEE 34th Annual Conference on Power Electronics Specialist, 2003. PESC '03.

Date of Conference: 15-19 June 2003

Date Added to IEEE Xplore: 04 August 2003

Print ISBN:0-7803-7754-0

Print ISSN: 0275-9306

DOI: 10.1109/PESC.2003.1218154

Conference Location: Acapulco, Mexico

Contents

I. Introduction

Traditionally, LC filter is used for an inverter power supply. A grid-interconnected inverter used in distributed generation (DG), however, has some unique requirements that an LC filter may not be sufficient. This paper comprehensively discusses the design considerations of the output filter for the grid-interconnected inverter. The design is validated by Saber simulations.

References is not available for this document.

Output filter design for a grid-interconnected three-phase inverter

Abstract:

Metadata

Abstract:

I. Introduction

References

IEEE Account

Purchase Details

Profile Information

Need Help?

Output filter design for a grid-interconnected three-phase inverter

Alerts

Abstract:

Metadata

Abstract:

I. Introduction

Authors

Figures

References

Citations

Keywords

Metrics

References