Loading [MathJax]/extensions/MathZoom.js
Guocheng Ding - IEEE Xplore Author Profile

Showing 1-19 of 19 results

Results

The NV center (nitrogen-vacancy center, NV) of the diamond can be used to realize the magnetic measurement function by microwave frequency sweep modulation and demodulation at room temperature, with high magnetic field sensitivity. In order to solve the problems of long test time and the low sampling rate of single microwave sweep frequency modulation and demodulation system, a double microwave mo...Show More
In recent years, there are many accidents of gas protection misoperation caused by normal switching of on-load tap changer. In order to explore the cause of misoperation, an experimental platform for the study of gas relay action characteristics was built based on 2XCMDI-1000/126C-10193W on-load tap changer. Different working conditions were made inside the tank by means of pressure injection by a...Show More
Partial discharge optical measurement method has a strong anti-interference ability and high sensitivity, becoming one of the most important and effective methods to evaluate the insulation condition of electrical equipment, whose signal detection capability is closely related to the way the fluorescent fiber sensor is laid out. In order to clarify this point, an experimental platform for fluoresc...Show More
DC bias will make the transformer core saturated, causing local overheating and insulation materials aging. Therefore, it is of great significance to study the suppression of DC bias in transformers. In this article, a magnetic compensation scheme of DC bias based on a hybrid transformer (HT) integrated an auxiliary DC/DC converter is proposed. First, a compensation mechanism is established by des...Show More
The variation of magnetic state of transformer often causes the violent vibration of the transformer various parts, especially the core. The most obvious magnetic state change of the transformer is usually caused by the dc component. In this article, one kind of magnetic compensation method is adopted to suppress the dc bias, and the core vibration caused by the transformer magnetic state change i...Show More
To overcome the problems of long period and inaccuracy of fixed-cycle power outage maintenance of bushing, the on-line monitoring system of high-voltage bushing is discussed, and a designed scheme of on-line monitoring device for bushing end shield is given, to ensure the timely detection of insulation defects of bushing equipment, which is of great significance to ensure the safe operation of pow...Show More
The stability of the power system is becoming more and more essential with the rapid development of the national economy, as one of the most important components of power transformers, bushing plays a significant role in electrical insulation. This paper takes the 500 kV GOE oil-immersed bushing as the object of study, constructing a bushing simulation model, and using FEM (Finite Element Method) ...Show More
In recent years, oil-filled power transformer explosion accidents occur from time to time, and have caused serious effect to the power system. To analyze the cause of oil tank rupture, a new numerical simulation model is established to calculate internal pressure rise caused by arc fault, and stress field of the tank body. Based on theories of wave acoustics, thermodynamics and solid mechanics, th...Show More
Bushing maintenance is a normal operation in power substations, but the maintenance cycle is too long in fixed period power outage maintenance schemas which decreasing the maintenance accuracy. In this paper, an on-line brushing monitoring system is proposed to change the situation. A kind of on-line monitoring device for the end shield of the bushing is developed to ensure casing equipment insula...Show More
With the development of country economy, the demand for reliability of power supply is gradually increasing. The insulation performance of high-voltage bushing is widely concerned as one of the main components of transformer. In this paper, aiming at improving the performance of the 500 kV GOE oil-immersed bushing, the electric field simulation model of the bushing is established by using the fini...Show More
In this brief, Redundant Binary Representation (RBR) is applied in Montgomery modular multiplication (MMM) to eliminate the long carry chain and realize parallel computation. A novel MMM algorithm based on RBR is proposed. Based on the proposed algorithm, different sizes of high-performance and low-cost Montgomery multipliers are implemented in TSMC CMOS process technology. The experimental result...Show More
Transformer, one of the most important components in a power system, functions as the vital to the safety of power supply system. However, great economic losses and industrial accidents can result from transformer winding deformation. Therefore, it is quite essential to use a precise transformer model when taking simulation to diagnose the transformer winding deformation correctly and instantly. A...Show More
Transformer is one of the most important components in power system. However, great economic losses and industrial accidents can result from its faults, and one of the most serious of all faults is transformer winding deformation. And frequency response analysis (FRA) is gaining popularity in detecting power transformer winding deformation for its accuracy. And multi-conductor transmission line mo...Show More
This work is devoted to the analysis of the surge of insulating oil in the tank during the switching process of the onload tap changer (OLTC) of the transformer. Based on the physical process of OLTC switching, the flow field during the switching process is divided into two stages, namely the bubble expansion stage and the gas-liquid two-phase flow stage. The flow fields of these two stages are ma...Show More
The arc generated when the on-load tap-changer (OLTC) is switched can cause the insulating oil inside the oil tank to surge. With the increase of transformer capacity, the oil surge is very severe due to the large arc current during the switching process, and the gas protection misoperation accident occurs frequently. This paper first analyzes the characteristics of the oil flow velocity in the co...Show More
The localization of partial discharge (PD) sources using the acoustic emission(AE) technique has attracted increasing research attention. Previous studies have focused on applying different optimization algorithms to solve the time difference of arrival equations. Some simple iteration algorithms and some intelligent optimization algorithms are used to solve the time difference of arrival equation...Show More
The diagnosis of partial discharge(PD) in power transformer is of great significance to the evaluation of transformer operation state. The traditional method which is based on pattern recognition of Phase Resolved Partial Discharge(PRPD) Pattern is limited to the morphological characteristics of partial discharge spectra analysis. The lack of deeper research of the characteristic of partial discha...Show More
The partial discharge (PD) is the main cause of the insulation failure in power transformers. Localization of the partial discharge source in the transformer effectively and precisely has a very important meaning in the insulation maintenance. The acoustic emission(AE) method has attracted researchers' attention because AE sensors have excellent ability to resist electromagnetic interference and t...Show More
Transformer is one of the most important equipment in the power system, assuming the voltage conversion, distribution, transmission of electrical energy mandate in power network, which is an important prerequisite for safe and stable operation of power system. Once the transformer fault, it may lead to blackouts, and even the collapse of the power network, causing huge economic losses. From the po...Show More