Loading [MathJax]/extensions/MathZoom.js
Nagendra Kumar - IEEE Xplore Author Profile

Showing 1-14 of 14 results

Filter Results

Show

Results

This work proposes two third-order bandpass filters (BPFs): one with low-side transmission zero and the other with high-side transmission zero, to improve the selectivity of the passband. To generate the transmission zero, the structure relies primarily on the electrical coupling of two folded open-loop resonators that are internally coupled with a half-wavelength resonator. A half-wavelength reso...Show More
This paper presents a novel multi-mode single resonator-based dual-band tunable bandpass filter (BPF). The layout is designed with a half-wavelength resonator centrally loaded with stubs. To tune the odd and even mode resonance frequencies, two varactors are connected at the open ends of the half-wavelength resonator that participate in the formation of two different passbands. A centrally loaded ...Show More
An U-shaped resonator based bandstop filter (BSF) has been reported in this paper to reject the high power unwanted signal or interfere near to the desired signal. The BSF uses mixed coupling technique - electrical and magnetic - to realize its performance. The U-shaped resonators which are open on both sides are coupled to the feed-line or main line using a coupling gap. The resonators are approx...Show More
A miniaturized and high rejection band pass filter (BPF) realized by low-temperature cofired ceramic technology are presented in this paper. The design consists of conducting patterns distributed on different dielectric layers. Grounded combline resonators loaded with capacitors are used as a basic topology for the design of the proposed filter. The capacitor has been realized using metal-insulato...Show More
A compact coplanar-waveguide (CPW) based switchable bandpass to bandstop filter has been presented in this manuscript. The bandpass consists of open-loop resonator which is centrally connected to the ground plane of CPW. The inductive and capacitive couplings are realized using grounding at the center and open ends of resonator respectively. These two couplings lead to two transmission zeros acros...Show More
The manuscript presents a miniaturized four-way power divider with a sequential phase difference of 90°. The proposed power divider is designed using one rat-race coupler (RRC) and two branch-line couplers (BLC). For the minia-turization three open stub conversion of a single transmission line technique with meandering has been used. A Four-way power divider for the frequency of 145.825 MHz is des...Show More
A pin diode loaded multi-mode resonator (MMR) based tunable filter has been presented in this manuscript. The filter consists of U-shaped resonator which are loaded with varactor tuned stubs at the middle. Also the resonator is loaded with PIN-diodes at the end. The proposed filter has two modes of operation based on the condition of PIN diodes - BPF mode, when the PIN diodes are ON and switch-off...Show More
A two-pole reconfigurable and tunable bandpass filter (BPF) with constant absolute bandwidth (CABW) and tunable transmission zeros (TZs) is presented in this brief. The BPF consists of asymmetrical spiral resonators having open ends on one side and capacitor loaded on the other side. The varactor loaded coupled-feed scheme is used at input and output. The two coupling feed-lines are also coupled t...Show More
Very often, a measurement is transmitted through network systems before it is available for filtering. The network systems, designed with several communication channels, are prone to cyber-attacks. The cyber-attack often injects false data to alter the original measurement. This article develops a modified Bayesian approximation filtering method for nonlinear filtering with measurements altered du...Show More
A third-order multi-mode resonator (MMR) based tunable bandpass filter (BPF) with constant absolute bandwidth (CABW) is presented in this manuscript. A varactor-loaded grounded half-wavelength resonator is centrally connected with varactor-loaded stubs. The odd mode of a half-wavelength resonator is tuned by symmetrically connected varactors whereas two consecutive even modes are tuned by varactor...Show More
Bandpass (BP)-to-bandstop (BS) switchable filters using radio frequency microelectromechanical system switch are presented here. The filters are implemented in both single- and dual-band versions with variable fractional bandwidth (FBW). Tuning of transmission zeros (TZs) and transmission poles (TPs) for BP filter (BPF) and BS filter (BSF), respectively, is achieved in both single- and dual-band c...Show More
A tunable dual-band bandpass filter (BPF) with reconfigurable selectivity and bandwidth control using varactor diodes has been presented in this paper. The proposed dualband BPF consists of two dual-mode microstrip resonators with centrally loaded stubs. It is shown that, the transmission zero (TZ) of a single dual-mode stub-loaded resonator can be tuned to lower or higher side of the passband. Us...Show More
A compact tunable wideband bandpass filter (BPF) having constant absolute bandwidth (CABW) with tunable selectivity and second harmonic suppression is presented in this letter. The BPF is designed using non-uniform quarter-wave spiral resonators loaded with varactor diodes and a capacitively coupled stub. The BPF consists of combline coupled section also. It is shown that the inherent transmission...Show More
In this paper, a switchable compact microstrip band-stop filter (BSF) to bandpass filter (BPF) using spiral resonator is reported. In BSF, spiral resonator has open ends as against to the shorted ends of the BPF. This concept is used to design the filter switchable so that in a single layout, the two filters - BSF and BPF - can be achieved. PIN diode is used for switching operation. Also a mathema...Show More