Showing 1-25 of 3,254 resultsfor "Index Terms":Safety Criteria
"Index Terms":Safety Criteria
- Sort
Get notified when new research is published matching your search criteria.
Sort By
Results
Criteria are established in this standard for variable selection, performance, design, and qualification of accident monitoring instrumentation for anticipated operational, design basisevents and Severe Accidents.Show More
Technological Safety Management of Electrotechnical Companies Production Activities
Nikita A. Drozdov;Elena L. Kuzina;Petr V. Kurenkov;Julia A. Tagiltseva;Marina A. Vasilenko
2020 International Conference Quality Management, Transport and Information Security, Information Technologies (IT&QM&IS)
Year: 2020 | Conference Paper |
Cited by: Papers (6)
The authors of the article identified socioeconomic and environmental criterions for technological safety of production activities of enterprises in the electrotechnical industry. The stability parameters of electrotechnical companies are formed. A model of technological safety management based on the basis of identified safety criterions and the Zwicky cube has been developed. Based on the morpho...Show More
Criteria for variable selection, performance, design, and qualification of accident monitoring instrumentation are established in this standard. Included requirements for display alternatives for accident monitoring instrumentation, documentation of design bases, and use of portable instrumentation.Show More
Preference disaggregation in ARAS-H method for road safety problem in Tunisia
2020 International Conference on Decision Aid Sciences and Application (DASA)
Year: 2020 | Conference Paper |
Road safety is a major problem to deal with due to its impact on human lives. Indeed, implementing a straight and a clear road safety strategy leads to a decrease in road accidents and therefore its resulting injuries and fatalities. As a matter of fact, the multi criteria decision aiding methods find naturally their place since we are dealing with a ranking problem within a hierarchical structure...Show More
Derivation of Railway Software Safety Criteria and Management Procedure
2009 International Conference on Information and Multimedia Technology
Year: 2009 | Conference Paper |
Cited by: Papers (1)
Ariane 5 rocket which is a test flight of European Space Agency was exploded 37 seconds after launch due to a malfunction in the control software. The amount of this loss is more than US$370 million. The accident has initiated the criticality of the software safety. Nowadays software is widely used in the safety critical system because of the merit of the flexibility. But the flexibility makes it ...Show More
First Page of the Article
Show MoreA Hybrid Best-Worst Method (BWM)—Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) Approach for Prioritizing Road Safety Improvements
Priyank Trivedi;Jiten Shah;Robert Čep;Laith Abualigah;Kanak Kalita
The increase in road accidents underscores the urgent need for effective methodologies to evaluate and prioritize road safety improvements. Traditional decision-making processes in road safety management often confront challenges due to the lack of a comprehensive approach, particularly in handling multiple evaluation criteria. This study introduces a novel Hybrid Multi-Criteria Decision-Making ap...Show More
Software safety criteria and application procedure for the safety critical railway system
2009 Transmission & Distribution Conference & Exposition: Asia and Pacific
Year: 2009 | Conference Paper |
Cited by: Papers (2)
Software is widely used in the railway system such as train propulsion system, brake system, train control system, train detection system and driver display unit. Unfortunately, there is no software criteria and development procedure that are required to get the qualified software. Although analysis and evaluation of each step in the software lifecycle are the basic activity, direct coding to get ...Show More
A MCDA Approach for Prioritizing Road Safety Indicators
2023 14th International Conference on Intelligent Systems: Theories and Applications (SITA)
Year: 2023 | Conference Paper |
Key Performance Indicators play a crucial role in monitoring and evaluating the performance of road safety systems. However, the process of selecting the most representative indicators can be challenging due to the multi-dimensional nature of road safety and the large number of available indicators. In this study, we propose a comprehensive approach for the effective ranking and prioritization of ...Show More
Application of the single-failure criterion to the electrical power, instrumentation, and control portions of nuclear power generating station safety systems is covered. Conformance with the requirements of IEEE Std 603-1991 and the single-failure criterion as stated in that document is established. Interpretation and guidance in the application of the single-failure criterion, a discussion of the...Show More
The digital system performs more varying and highly complex functions efficiently compared to the existing analog system because software can be flexibly designed and implemented. The flexible design makes it difficult to predict the software failures. Even though the main characteristic of railway system is to ensure safety, nowadays software is widely used in the safety critical railway system j...Show More
Analysis of Factors Affecting Safety Management in Construction Projects
2010 International Conference on Management and Service Science
Year: 2010 | Conference Paper |
Cited by: Papers (1)
The influence of construction safety on a project is complex and important, including schedule on milestones, delays in project duration and cost overruns. So a number of safety improvement measures have been taken to migrate this problem in the construction industry of China in the face of the poor safety records. However, not all of these programs are effective enough to satisfy with the need of...Show More
Safety Classifications for the Fusion DEMO Plant of Korea
Hyuck Jong Kim;Young-Seok Lee;Myeun Kwon;Jong Kyung Kim;Siwan Noh;Gyunyoung Heo;Ken Sowder
Regulatory requirements and industrial codes and standards (C&S) are to be compulsory top-tier prerequisites for the design and construction of the fusion DEMO plant of Korea (DEMO Plant) as it will have safety-related functions to mitigate radiation hazards to the environment. However, these prerequisites will be developed in parallel with the design and construction of DEMO Plant due to the firs...Show More
Safety and Quality of Air Criteria in Objects with Artificial Human Environments
2021 14th International Conference Management of large-scale system development (MLSD)
Year: 2021 | Conference Paper |
The paper considers the criteria for the safety and quality of air in artificial human habitats, the factors of the influence of atmospheric air on the human environment, the main factors of influence of atmospheric air on the human environment. Risk factors of air security violation from internal sources of air pollution discussed.Show More
The application of the single-failure criterion to the electrical power, instrumentaion, and control portions of nuclear power generating station safety systems is covered. Conformance with the requirements of IEEE Std 603-1991 and the single-failure criterion as stated in that document is established. Interpretation and guidance in the application of the single-failure criterion, a discussion of ...Show More
Formal verification of software safety criteria using Event-B
2014 10th International Conference on Reliability, Maintainability and Safety (ICRMS)
Year: 2014 | Conference Paper |
Software safety criteria plays a very important role in verifying software safety, and it offers the target when we carry out safety analysis. However, the software criteria has not been widely applied, because the description in natural language may be semantically vague and the manual verification brings huge workload. Formal methods can just make up the above weakness because of its rigorous lo...Show More
Predicting safety performance to control risk in military systems
2017 International Conference on Military Technologies (ICMT)
Year: 2017 | Conference Paper |
This paper deals with research of safety performance predictions to allow improved risk control in military. Safety performance is identified as appropriate tool to establish system-wide information on safety which can serve the decision making process on how to manage safety. The information contributes to better understanding of behavioural patterns in the controlled system and the ability to fo...Show More
Dynamic Monitoring on Construction Safety Based on Support Vector Machine
Li Shu-quan;Zhao Xin-li;Lu Zhi-qiang;Fan Li-xia;Ma Lan;Gao Qiu-li
2006 International Conference on Management Science and Engineering
Year: 2006 | Conference Paper |
Cited by: Papers (2)
In this paper, the performance of safety management in building construction in China is summarily analyzed. Considered the factors of the underlying causes of the construction safety accidents including staff, equipment, material, technique and circumstance, and combined with the latest study achievement of construction safety management at home and abroad, the underlying causes of poor safety ma...Show More
An Approach to Modeling Software Safety
2008 Ninth ACIS International Conference on Software Engineering, Artificial Intelligence, Networking, and Parallel/Distributed Computing
Year: 2008 | Conference Paper |
Cited by: Papers (3)
Software for safety-critical systems must deal with the hazards identified by safety analysis in order to make the system safe, risk-free and fail-safe. Software safety is a composite of many factors. Existing software quality models like McCall's and Boehm's and ISO 9126 are inadequate in addressing the software safety issues of real time safety-critical embedded systems. At present there does no...Show More
Standardization related to electromagnetic compatibility and functional safety
2008 International Symposium on Electromagnetic Compatibility - EMC Europe
Year: 2008 | Conference Paper |
Cited by: Papers (2)
Standardization related to electromagnetic compatibility (EMC) is dealt with in a broad range of documents whereas most of them are given in the IEC 61000-X-Y series which includes International Standards, Technical Specifications or Technical Reports. This series is further accompanied by a lot of product family or product specific standards that contain corresponding EMC requirements. Since seve...Show More
Guidance on basic qualification principles and appropriate methods of demonstrating the qualification of equipment used in nuclear facilities is provided in this standard. The principles, methods, and procedures described are intended to be used for qualifying equipment.Show More
Conditional and unconditional safety performance forecasts for aviation predictive risk management
Andrej Lališ;Vladimír Socha;Jakub Kraus;Ivan Nagy;Antonio Licu
This paper deals with safety performance predictions in the aviation, which address the long-term global efforts to achieve predictive risk management by the year 2028. Predictive risk management regards timely and accurate detection of risk, well before some incident or accident takes place so that effective control actions can be provided. To assure achieving such diagnosis, it is necessary that...Show More
Creating a composite road safety performance index by a hierarchical fuzzy TOPSIS approach
2010 IEEE International Conference on Intelligent Systems and Knowledge Engineering
Year: 2010 | Conference Paper |
Cited by: Papers (3)
With the increasing public awareness of the complexity of road safety phenomenon, much more detailed aspects of crash and injury causation rather than only crash data (e.g., the number of road fatalities) are extensively investigated in the current road safety research. Safety performance indicators (SPIs), which are causally related to the number of crashes or to the injury consequences of a cras...Show More
Assessment of Asset Safety Risk for Transmission Stations
2006 International Conference on Probabilistic Methods Applied to Power Systems
Year: 2006 | Conference Paper |
Cited by: Papers (1)
Safety to workers and to the public has been one of the most important concerns for electric utilities to be in the deregulated electricity market. In achieving high safety performance for station equipment, electric utilities are using approved planning, design and operation guidelines and standards in order to minimize or eliminate hazardous events that may endanger safety to personnel. Hydro On...Show More
Assessment of asset safety risk for transmission stations
2006 IEEE Power Engineering Society General Meeting
Year: 2006 | Conference Paper |
Cited by: Papers (1)
Safety to workers and to the public has been one of the most important concerns for electric utilities in the past and continues to be so in the deregulated electricity market. Two years ago, Hydro One launched a new initiative to make the company injury free and therefore, major efforts were taken to accomplish such a target. In achieving high safety performance for station equipment, electric ut...Show More
IEEE Account
Purchase Details
Profile Information
Need Help?
- US & Canada: +1 800 678 4333
- Worldwide: +1 732 981 0060
- Contact & Support
- About IEEE Xplore
- Contact Us
- Help
- Accessibility
- Terms of Use
- Nondiscrimination Policy
- Sitemap
- Privacy & Opting Out of Cookies
A not-for-profit organization, IEEE is the world's largest technical professional organization dedicated to advancing technology for the benefit of humanity.
© Copyright 2025 IEEE - All rights reserved. Use of this web site signifies your agreement to the terms and conditions.