A purely solid-state based method for bilirubin levels determination in plasma

In the past half-century, the advent of solid-state electronics, i.e., microcontrollers, transistors, photodiodes, light-emitting diodes and more, has led to the improvement of the tools we, as a human race, need and use in our daily lives. Solid-state electronics has specifically contributed significantly to the field of biomedical engineering and has allowed various round-the-clock point-of-care testing applications. These include handheld, wearable, and implantable sensors and devices for accelerated interventions. Furthermore, miniaturization has accelerated the implementation of low-cost and energy-efficient systems with increased performance. In this paper, we have used optical techniques along with the benefits of solid-state electronics to measure bilirubin concentration in plasma with concentrations projected from healthy individuals to hyperbilirubinemia (0 - 30 mg/dL). Traditionally, full-range spectrophotometry is the gold standard optical method and provides the most accurate results but suffers from instrument complexity. Thus, this paper proposes and investigates the measurement of bilirubin by using a dual-wavelength approach combined with photodegradation kinetics. By tracking the changes in the spectral characteristics of bilirubin for 10 minutes (~3 J/cm2), a new model was built to measure bilirubin concentrations and distinguish between low vs high and risky vs non-risky levels. Results show a high positive correlation between the optical responses and concentration (R-square > 0.93) with an average accuracy of ~1.4 mg/dL. On top of that, the technique's viability for point-of-care testing of bilirubin levels was studied using a system-on-chip optical module. Thus, this could help suggest neonatal therapeutic interventions, including enteral feeding, phototherapy, and blood transfusion.