State Feedback Reshaping Control of Voltage Source Converter

Admittance reshaping is a widely used strategy to address the converters low-frequency stability issues in weak grid, caused by the PLL and its interaction with the dc and ac voltage controls. However, the asymmetric control of the
$d$
- and
$q$
-axis current references and the coupling between the converter ac and dc sides restricts the damping capability of single-input single-output feedbacks. This phenomenon gets even worse in the presence of nearby converters. This article extends the concept of admittance reshaping to multi-input multi-output control. A full state feedback is added to the current reference of the converter to increase the damping of the conventional multiloop control. A systematic offline algorithm is delegated to design the feedback, and a scalar coefficient is employed to activate/deactivate online the reshaping feedback, making the proposed solution user-friendly. The proposed control is analyzed both in time and frequency domains and tested in parallel-operation with other converters, and shows higher damping capability than conventional solutions and good robustness with respect to grid impedance and operating point variations. Experimental tests under ac and dc disturbances are conducted both in lab setup and in hardware-in-the-loop.