Coordinated Control for Performance Enhancement of an Islanded AC/DC Microgrid With Uninterrupted Power and Seamless Transition Capabilities

This article presents a simplistic control approach and multimode operation of a wind-solar-based ac/dc microgrid. The islanded microgrid consists of a doubly-fed induction generator (DFIG) for wind energy conversion, and a solar photovoltaic array for solar energy conversion. In this configuration, the stator terminals of DFIG are connected at the point of common intersection (PCI) of ac loads via a stator-side solid-state transition switch (
S
_SSTS
). The developed control strategy is designed to seamlessly disconnect and reconnect the DFIG stator from the PCI based on the
S
_SSTS
operation, without interrupting power to ac and dc loads in the microgrid. The disconnection of stator terminals is required in the event of a prolonged period of no wind generation from the DFIG. The controller is synthesized to ensure no or low transient effect during the transition between the two operating modes, i.e., DFIG stator connected mode (SCM) and stator disconnected mode (SDM). Further, the power quality enhancement of stator voltages and currents amidst nonideal ac loads is ensured without need for computationally exhaustive approaches involving sequence decompositions, notch filters, resonant regulators, or load current sensors. Moreover, the power quality enhancement at the DFIG stator is achieved without injecting any undue harmonics in the DFIG rotor currents. The effectiveness of this islanded microgrid is verified through obtained results from a developed laboratory prototype.