Highly Sensitive Fiber Bragg Grating Sensing System Based on a Dual-Loop Optoelectronic Oscillator With the Enhanced Vernier Effect

In this paper, a highly sensitive fiber Bragg grating (FBG) interrogation system based on a dual-loop optoelectronic oscillator (OEO) with the enhanced Vernier effect has been proposed and experimentally demonstrated. Light reflected from the FBG sensor is used as the optical source of the OEO. By introducing dispersion in the OEO loop, the sensor information encoded in the FBG wavelength can be interrogated by detecting the frequency of microwave signal generated by the OEO loop. The dispersive media in OEO has two paths, one path is formed with a roll of dispersion compensation fiber (DCF), and the other path is formed with a roll of single-mode fiber (SMF). By designing the length of two paths with slightly difference, the Vernier effect is generated in the OEO. Since the dispersion of the two paths is opposite, an enhanced Vernier effect can be realized, which can significantly enhance the sensitivity. The experimental results prove the possibility of applying the concept of enhanced Vernier effect to the OEO for temperature sensing. The sensitivity is about 0.926 kHz/°C and 0.0912 kHz/°C for a single-loop OEO with DCF and SMF, respectively. By employing the enhanced Vernier effect, the sensitivity can be improved to 141.13 kHz/°C, which is estimated about 152.4 and 1547.5 times higher than that of the two single loops, respectively. Furthermore, sensitivity can be further improved by using a dispersive link with larger dispersion.