Low-Frequency Oscillation Analysis of Virtual-Inertia-Controlled DC Microgrids Based on Multi-Timescale Impedance Model

Virtual inertia and damping control (VIDC) improves the stability of DC microgrid (DC-MG). However, the potential positive feedback aggravates low-frequency oscillation induced by the interaction insides control loops, which is explained and solved in this paper. The multi-timescale impedance modelling framework is established to clarify stability mechanism of VIDC and the low-frequency oscillation of VIDC controlled DC-MG. Control loops of different timescales are visualized as independent
loop virtual impedance
(LVI) elements to form an
impedance circuit
considering the constant power load (CPL), rather than an all-in-one impedance as the external dynamic representation of power converters. Concrete impedance analysis is performed on LVI to reveal the impedance-shaping effect of control loops intuitively, the physical impedance nature of control parameters and the interaction among different timescale, which illustrates the stability mechanism of VIDC. The low-frequency oscillation (
LC
impedance interaction) in voltage- and inertia-loop is elaborated by
RLC
circuits of LVIs. The potential instability factors, resulting in poor damping against voltage oscillation, are also revealed. Thus, dynamic stability enhancement method is further proposed to compensate for the negative damping caused by positive feedbacks of VIDC and CPL, and super-capacitor is added to alleviate rapid voltage changes. Accordingly, the passivity property of system impedance is strengthened and the stability can be evaluated by Nyquist plot. Finally, the simulation and experiment results have validated the low-frequency oscillation analysis and stability enhancement method.