An Improved Design of Event-Triggered Feedback Controllers for Linear Systems Based on Fast and Slow Dynamics

In this article, an event-triggered technique is proposed to implement state feedback controllers for continuous-time linear systems. Toward this end, the closed-loop dynamic is decomposed into the fast and slow subsystems. Then, two individualized event-triggered mechanisms (ETMs) are designed to compute two sequences of updates. The first ETM determines when the fast subsystem should be sampled and its measured data should be sent to the controller. The second ETM decides the execution times for sampling all the system states, including both the fast and slow states. The proposed event-triggered technique leads to sampling policies in which the data of the slow states are sent to the controller with long interevent intervals whereas the fast dynamics are simultaneously allowed to be sampled with relatively shorter interevent intervals. In comparison with conventional methods with one ETM, the proposed event-triggered technique, equipped with an extra degree of freedom, leads to better results both in achieving smoother closed-loop responses and reducing the number of the transmitted packages from the system to the controller. Theoretical aspects of the proposed method including the boundedness of the system and its Zeno free property are investigated. Two simulation and experimental case studies are provided to show the effectiveness of the proposed event-triggered controller.