Power Line Communication for Grid Monitoring: A Prototype Based on Software Defined Radio

We describe a prototype for power line communication for grid monitoring. The PLC receiver is used to gain information about the PLC channel and the current state of the power grid. The PLC receiver uses the communication signal to obtain an accurate estimate of the current channel and provides information which can be used as a basis for further processing with the aim to detect partial discharges and other anomalies in the grid. This monitoring of the power grid takes advantage of existing PLC infrastructure and uses the data signals, which are transmitted anyway to obtain a real-time measurement of the channel transfer function and the received noise signal. Since this signal is sampled at a high sampling rate compared to simpler measurement sensors, it contains valuable information about possible degradations in the grid which need to be addressed. While channel measurements are based on a received PLC signal, information about partial discharges or other sources of interference can be gathered by a PLC receiver in the absence of a transmit signal. A prototype based on Software Defined Radio has been developed, which implements the simultaneous communication and sensing for a power grid.