Sensorless Control With Fault-Tolerant Ability for Switched Reluctance Motors

This paper presents a new sensorless control strategy with the fault-tolerant ability for switched reluctance motors (SRMs). Nowadays, many rotor position detection methods are utilized, but most of them increase the system cost due to the additional hardware or complex calculations. To address this problem, various methods of using phase inductance to estimate the rotor position and speed have been proposed. However, the traditional inductance detection method will cause signal distortion due to the presence of interference signals and the unbalanced phase inductance. In particular, the turn-ON angle is advanced. To further improve the stability of the control system, the interference signals are eliminated via establishing the reference time of the inductance characteristic point and the error band in this work. When the position signal disappears, the inductance characteristic points of adjacent phases will be adopted for signal compensation to realize fault-tolerant control. Finally, an SRM drive system is used to verify the effectiveness of the proposed control strategy.