Processing of Multichannel Sliding Spotlight SAR Data with Large Pulse Bandwidth and Azimuth Steering Angle

Azimuth multichannel synthetic aperture radar (SAR) working in the sliding spotlight mode can effectively achieve ultrahigh resolution and wide swath imaging. However, multichannel sliding spotlight SAR echoes with large pulse bandwidth and azimuth steering angle are difficult to reconstruct and process due to the large range frequency-dependent Doppler centroid varying frequency support. To resolve this problem, two azimuth preprocessing approaches both based on the range frequency-dependent deramping strategy are proposed in this article. In both approaches, echoes are handled by a range frequency-dependent azimuth deramping function at first, which assign the signal measurements to unambiguous Doppler frequencies. Afterward, in the first preprocessing approach, azimuth multichannel raw data can be reconstructed and combined before azimuth upsampling in the conventional two-step preprocessing technique. The other way to handle the deramped multichannel raw data is the modified full aperture azimuth multichannel sliding spotlight reconstruction approach, which embeds azimuth multichannel reconstruction into azimuth convolution between the deramped raw data and the selected range frequency-dependent azimuth deramping function. Furthermore, the azimuth data in the second approach should be resampled to obtain a uniform azimuth sampling interval. Computational complexity and effects on the following imaging algorithm of both approaches are analyzed and compared. Simulation results validate the proposed two azimuth multichannel preprocessing approaches.