A Novel Rotor Initial Position Detection Method Utilizing DC-Link Voltage Sensor

A new simple rotor initial position detection method for permanent magnet machines is proposed in this article. It is based on the magnetic saturation effect, which is commonly used by existing methods. Different from the conventional methods utilizing phase current or phase voltage sensors, the dc-link voltage sensor is used to estimate the rotor initial position. In the proposed method, a specific excitation approach is used to enhance the performance and a so-called “equivalent injection position” is developed to simplify the estimation process. The proposed method can achieve a 30° estimation resolution. Besides, practical considerations, including the dc-link voltage measurement errors, dc-link resistance, dc-link capacitance, and dc-link voltage ripples, are discussed in this article. A guideline of voltage pulse selection is presented to minimize the impact of these practical issues. Moreover, it is found that as the dc-link resistance increases, the proposed method shows a better estimation performance than the conventional methods. Besides, the proposed method is insensitive to sensor measurement errors. The experimental results are given to verify the effectiveness of the proposed method.