Modular Multilevel Converter with Minimum Arm Inductance and Automatic Sub-module Voltage Balance - Y-Matrix Modulation and its Theoretical Proof of the Automatic Voltage Balance

The modular multilevel converter (MMC) is one of the most promising topologies for high- and medium-voltage applications. However, the conventional MMC relies on large arm inductance and complicated feedback control to maintain submodule (SM) capacitor voltages balanced, which requires a large number of voltage sensors and complicated arm current control loops. In contrast to the conventional perspective, the MMC can be regarded as a derivative from the general multilevel topology based on switched-capacitor (SC) structure. The SC structure endows excellent properties to the MMC, such as minimum or no arm inductor and automatic SM capacitor voltage balancing capability. This MMC with minimum or no arm inductor is named as SC-MMC. Since the arm inductances are very small, the SM capacitor voltages can be balanced automatically. Small stray/parasitic inductance is enough to limit inrush current during SM's switching instants to the rated current level. To unleash the automatic SM capacitor voltage balancing capability of the SC-MMC, a Y-matrix modulation (YMM) has been proposed, which does not require closed loop control or any sensor, has no limitations on the number of SMs, and works for both half-bridge and full-bridge SMs. An unresolved issue of the emerging YMM is that, in the published literature, the existence of the Y matrix with full rank has not been proved theoretically beyond the observation for the SC-MMC when the number of SMs is large. In this paper, an analytical proof of the existence of the full rank Y matrix is provided, which implies the automatic voltage balance of SMs for the MMC with arbitrary number of SMs in each arm. Simulation results using the YMM on a 21-level SC-MMC with minimum arm inductance are provided to verify the voltage balance theory/observation of the SC-MMC using the YMM.