Coding-Based Low-Power Through-Silicon-Via Redundancy Schemes for Heterogeneous 3-D SoCs

Three-dimensional integration, employing through-silicon vias (TSVs), improves the system-on-chip (SoC) performance. However, redundancy schemes are required to cope with the relatively poor TSV manufacturing yield. Existing redundancy schemes do not exploit technological heterogeneity between the dies. Hardware costs can differ for the individual dies. This demands asymmetrical schemes with low complexity in costly mixed signal or RF dies. Furthermore, redundant TSVs are only used in the case of a defect. In the most probable case of correct manufacturing, they are unused. Another emerging technique using redundant lines is low-power coding (LPC). This paper presents a hybrid TSV redundancy technique based on coding, which can be used for LPC and for yield enhancement. Furthermore, the approach is strongly asymmetric. In case of a fault, a configuration is only required for the encoder or decoder located in the cheaper die, while in the costly die, a minimal set of XOR gates is sufficient. A case study for an existing heterogeneous SoC shows that the proposed technique decreases area overhead and power consumption compared to the best previous technique by over 69 % and 33%, respectively.