A Wi-Fi Cloud-Based Portable Potentiostat for Electrochemical Biosensors

The measurement of the analyte concentration in electrochemical biosensors traditionally requires costly laboratory equipment to obtain accurate results. Innovative portable solutions have recently been proposed, but usually, they lean on personal computers (PCs) or smartphones for data elaboration and they exhibit poor resolution or portability and proprietary software. This paper presents a low-cost portable system, assembling an ad hoc-designed analog front end (AFE) and a development board equipped with a system on chip integrating a microcontroller and a Wi-Fi network processor. The wireless module enables the transmission of measurements directly to a cloud service for sharing device outcome with users (physicians, caregivers, and so on). In doing so, the system does not require neither the customized software nor other devices involved in data acquisition. Furthermore, when any Internet connection is lost, the data are stored on board for subsequent transmission when a Wi-Fi connection is available. The noise output voltage spectrum has been characterized. Since the designed device is intended to be battery-powered to enhance portability, investigations about battery lifetime were carried out. Finally, data acquired with a conventional benchtop Autolab PGSTAT-204 electrochemical workstation are compared with the outcome of our developed device to validate the effectiveness of our proposal. To this end, we selected ferri/ferrocyanide as redox probe, obtaining the calibration curves for both the platforms. The final outcomes are shown to be feasible, accurate, and repeatable.