A GPS-Based Indoor Positioning System With Delayed Repeaters

Global positioning system (GPS) based indoor positioning techniques generally utilize repeaters to amplify and retransmit the original GPS signals to indoor receivers. In this paper, a GPS repeater based indoor positioning approach is proposed. Unlike most repeater-based indoor positioning techniques in current literature, repeaters are not required to connect to an outdoor antenna with fixed length cables. Neither do repeaters need to be synchronized. Each repeater retransmits the GPS signals continuously to the indoor receivers without sequential switching. Assume more than one satellite is visible to four or more repeaters. At a measuring time instance, the range from a repeater to the user receiver is identical for any travelling satellite signal, which is repeated by this repeater. Incorporating this feature and comparing the ranges measured by means of repeated signals of different satellites, the receiver is able to identify the repeater, which repeats a given satellite signal. With the known coordinates of the identified repeaters and the ranges from repeaters to the receiver, then the receiver position can be found. To compromise the impact of the repeater signal processing time difference on positioning accuracy, this work proposes two methods to calculate the receiver position and fuses the results by Kalman filter. Furthermore, considering the general indoor positioning environments, altitudes of floors of a building are utilized to assist in improving the positioning performance. Simulation results with true repeater coordinate data are provided to verify the proposed approach.