Core Characterization and Inductor Design Investigation at Low Temperature

Superconducting technologies such as motors together with the supporting cryogenic power electronic system are growing in importance in aircraft applications. It is critical to understand the influence of low temperature on filters of the power converter system in these applications. Also, it is worthwhile to investigate whether the converter system can achieve higher efficiency and high power density by utilizing the provided low temperature cooling environment. This paper conducted a comprehensive magnetic core characterization at low temperature to understand the core properties and support filter design at low temperature. The ferrite and nanocrystalline material are characterized from room temperature to cryogenic temperature in a wide range of operating frequencies. The results show that the permeability of ferrite material decreases by a factor of 7~8 and the core loss increases more than 10 times when operating at very low temperature. The permeability of nanocrystalline material decreases to 60% and the core loss increases 1.5~2.5 times when operating at very low temperature. The saturation flux density of both materials has slight increase at low temperature. Based on tested data, a case study of inductor design considering the low temperature cooling environment is presented to illustrate the influence of low temperature on inductor design.