A C-Band Geophysical Model Function for Determining Coastal Wind Speed Using Synthetic Aperture Radar

A new geophysical model function (GMF), called C_SARMOD2, has been developed to relate high-resolution C-band normalized radar cross section (NRCS), acquired in VV polarization over the ocean, to the 10-m height wind speed. A total of 3078 RADARSAT-2 and Sentinel-1A VV-polarized synthetic aperture radar (SAR) images, acquired under different wind speed conditions, were collocated with
in situ
buoy measurements. The paired dataset was used to derive transfer functions and coefficients of C_SARMOD2, and then to validate the wind speed retrievals. The comparison between SAR-retrieved wind speeds and buoy measurements show almost no bias and a root mean square error of 1.84 m/s. Two representative quad- and dual-polarization SAR images, acquired from coastal regions, are used as case studies to examine C_SARMOD2 performances. The case study and statistical validation results suggest that the proposed C_SARMOD2 has the potential to measure coastal wind speeds at subkilometer resolutions. Although derived from low resolution NRCS measurements, this study also confirms the great robustness of CMOD5.N and recent CMOD7 when applied to SAR data. In addition, it shows that with the new generation of SAR satellite-borne sensors, it is no longer mandatory to rely on scatterometers in order to build a GMF, which will be used for SAR applications. Such an approach is particularly important in view of the upcoming RADARSAT Constellation Mission with new polarization configurations. Moreover, it also opens new perspectives on the derivation of GMFs in HH-polarization. However, these results also suggest that for coastal areas, the increase of the resolution to define the GMF is less important than adding other geophysical parameters to improve wind retrieval performance. This advocates for the necessity of revisiting the methodologies for ocean surface wind speed measurements in coastal areas.