A Novel Line-Start Permanent Magnet Synchronous Motor With 6/8 Pole Changing Stator Winding

Line-start permanent magnet synchronous motors (LSPMSMs) have become superior to induction motors in general industrial applications due to their high efficiency, improved power factor, and enhanced torque density. However, the LSPMSM suffers the poor starting torque owing to the existence of the braking and pulsating torque at start-up, which seriously plagues its development. Therefore, this paper presents a novel LSPMSM with 6/8 pole changing stator windings, which can fundamentally improve the starting capability. At the beginning of the starting, the 6-pole stator windings are energized, whereas the rotor permanent magnets are 8 poles, so the braking torque and pulsating torque can be highly decreased. When the motor reaches a certain speed, the stator winding changes to 8 poles to pull into synchronization and stable operation. The design of the 6/8 pole changing winding is presented based on the slot-number phase diagram method. Then, the starting process of the conventional and the proposed pole changing LSPMSMs are analyzed and compared. Through the calculation of impedance parameters and the analysis of magnetic fields at the start-up, the torque components are calculated utilizing the analytical calculation method. Finally, the experiments are carried out to verify the validity and superiority of the proposed design and method.