Abstract:
Electrical conduction properties of PTFE filled with 0.2 wt.% of MoS2 are investigated in view of its use in high voltage dc applications. Conduction currents were measur...Show MoreMetadata
Abstract:
Electrical conduction properties of PTFE filled with 0.2 wt.% of MoS2 are investigated in view of its use in high voltage dc applications. Conduction currents were measured at temperatures from 25°C to 115°C and applied fields up to 60 kV/mm. Volume resistivity has been determined and the conduction mechanisms have been analyzed. After an “ohmic” behavior observed for fields lower than 20 to 30 kV/mm (depending on temperature), the current was found to be controlled by hopping and heterocharge-assisted Schottky injection.
Date of Conference: 22-25 October 2017
Date Added to IEEE Xplore: 15 January 2018
ISBN Information:
Citations are not available for this document.
Contents Cites in Papers - |
Cites in Papers - IEEE (1)
Select All
1.
Séverine Le Roy, Fulbert Baudoin, Christian Laurent, Gilbert Teyssèdre, "Analysis of Current–Voltage Characteristics in Insulating Polymers Using a Bipolar Charge Transport Model", IEEE Transactions on Dielectrics and Electrical Insulation, vol.29, no.6, pp.2101-2109, 2022.
