Optimization opportunities in RRAM-based FPGA architectures

Static Random Access Memory (SRAM)-based routing multiplexers, whatever structure is employed, share a common limitation: their area, delay and power increase linearly with the input size. This property results in most SRAM-based FPGA architectures typically avoiding the use of large multiplexers. Resistive Random Access Memory (RRAM)-based multiplexers, built with one-level structure, have a unique advantage over SRAM-based multiplexers: their ideal delay is independent from the input size. This property allows RRAM-based FPGA architectures to use larger multiplexers than their SRAM-based counterparts, without generating any delay overhead. In this paper, by carefully considering the properties of RRAM multiplexers, we assess that current state-of-art architectural parameters for SRAM-based FPGAs cannot preserve optimality in the context of RRAM-based FPGAs. As a result, we propose that in RRAM-based FPGAs, (a) the routing tracks should be interconnected to Look-Up Table (LUT) inputs via a one-level crossbar, instead of through Connection Blocks and local routing; (b) the Switch Blocks should employ larger multiplexers; (c) length-2 wires should be used instead of length-4 wires. When operated in nominal voltage, the proposed RRAM-based FPGA architecture reduces area by 26%, delay by 39% and channel width by 13%, as compared to a SRAM-based FPGA with a classical architecture. When operated in the near-V
_t
regime, the proposed RRAM-based FPGA architecture improves Area-Delay Product by 42% and Power-Delay Product by 5× as compared to a classical SRAM-based FPGA at nominal voltage.