Ionospheric Effects in GNSS-Reflectometry From Space

Global navigation satellite systems-reflectometry (GNSS-R) is an emerging technique that uses navigation opportunistic signals as a multistatic radar. Most GNSS systems operate at L-band, which is affected by the ionosphere. At present, there is only a GNSS-R space-borne scatterometer on board the UK TechDemoSat-1, but in late 2016, NASA will launch the CYGNSS constellation, and in 2019, ESA will carry out the GEROS experiment on board the International Space Station. In GNSS-R, reflected signals are typically processed in open loop using a short coherent integration time (~1 ms), followed by long incoherent averaging (~1000 times, ~1 s) to increase the signal-to-noise ratio. In this study, the global ionospheric scintillation model is first used to evaluate the total electron content and the scintillation index S
₄
. The ionospheric scintillation impact is then evaluated as a degradation of the signal-to-noise ratio, which can be used to assess the altimetry and scatterometry performance degradation in a generic GNSS-R mission. Since ionospheric scintillations are mostly produced by a layer of electron density irregularities at ~350 km height, underneath most LEO satellites, but closer to them than to the Earth's surface, intensity scintillations occur especially in the GNSS transmitter-to-ground transect, therefore, the impact is very similar in conventional and interferometric GNSS-R. Using UK TechDemoSat-1 data, signal-to-noise ratio fluctuations are computed and geo-located, finding that they occur in the open ocean along ~±20° from the geomagnetic equator where S
₄
exhibits a maximum, and in low wind speed regions, where reflected signals contain a non-negligible coherent component.