Limitation of Electric Arc Energy in LV Switches During Inductive Current Interruption

In this paper, the commutation and switching mechanisms between the operating low-voltage (LV) switch and parallel external branches are presented. Experiments for the limitation of electric arc energy during inductive current interruption were performed for three scenarios: 1) for standalone operated switch (base case), 2) for passive method of arc energy limitation (widely applied RC branch connected in parallel to operated switch), and 3) active method of electric arc energy limitation (current commutation into the external semiconductor branch controlled by the microprocessor system). A typical three-phase electromechanical LV switch with double arc quenching chamber was selected as the tested object. The following parameters were investigated: electric arc resistance, electric arc power, electric arc energy, as well as power and energy generated at the external branch connected in parallel to the operating switch. Measurements were performed for current interruption in a single-phase circuit. In addition, observations of a burning electric arc in the quenching arc chamber were registered by an ultraspeed camera (for two cases: base case and hybrid switching).