Optimal co-scheduling of HVAC control and battery management for energy-efficient buildings considering state-of-health degradation

The heating, ventilation and air conditioning (HVAC) system accounts for half of the energy consumption of a typical building. Additionally, the need for HVAC changes over hours and days as does the electric energy price. Level of comfort of the building occupants is, however, a primary concern, which tends to overwrite pricing. Dynamic HVAC control under a dynamic energy pricing model while meeting an acceptable level of occupants' comfort is thus critical to achieving energy efficiency in buildings in a sustainable manner. Finally, there is the possibility that the building is equipped with some renewable source of power such as solar panels mounted on the rooftop. The presence of a battery energy storage system in a target building would enable peak power shaving by adopting a suitable charge and discharge schedule for the battery, while simultaneously meeting building energy efficiency and user satisfaction. Achieving this goal requires detailed information (or predictions) about the amount of local power generation from the renewable source plus the power consumption load of the building. This paper addresses the coscheduling problem of HVAC control and battery management to achieve energy-efficient buildings, while also accounting for the degradation of the battery state-of-health during charging and discharging operations (which in turn determines the amortized cost of owning and utilizing a battery storage system)aa cč A time-of-use dynamic pricing scenario is assumed and various energy loss components are considered including power dissipation in the power conversion circuitry as well as the rate capacity effect in the battery. A global optimization framework targeting the entire billing cycle is presented and an adaptive co-scheduling algorithm is provided to dynamically update the optimal HVAC air flow control and the battery charging/discharging decision in each time slot during the billing cycle to mitigate the prediction error of unknown parameters. Experimental results show that the proposed algorithm achieves up to 15% in the total electric utility cost reduction compared with some baseline methods.