Chebyshev multilevel absorber design concept

Pyramidal- and wedge-absorber materials are used extensively in anechoic measurement chambers to attenuate stray signals. Typical absorber layouts result in large absorber walls in which the absorber tips and bases are roughly aligned in the same plane. Such a quasi-periodic configuration produces a strong coherent specular reflection which dominates the absorber scattered field. Based on the multisection impedance transformer concept, one can divide absorber elements into different levels (layers) so that this coherence can be destroyed to reduce the specular absorber scattering level. The synthesis of this desired behavior can be implemented by the Chebyshev transformer technique, which provides the largest bandwidth given a passband ripple threshold. The resulting reflected field is then the product of the original absorber response times the Chebyshev reduction factor, which is independent of polarization and absorber properties. Various measured results are used to show that more than a 10-dB improvement can be achieved at the critical low end of the frequency band using this approach. This improvement cannot be achieved using conventional design concepts unless the absorber size is doubled.