A 100 GHz coplanar strip circuit tuned with a sliding planar backshort

A means of mechanically altering the electrical length of a planar transmission line would greatly enhance the use of integrated circuit technology at millimeter and submillimeter wavelengths. Such a mechanically adjustable planar RF tuning element, successfully demonstrated at 100 GHz, is described here. It consists of a thin metallic sheet, with appropriately sized and spaced holes, which slides along on top of a dielectric-coated coplanar-strip transmission line. Multiple RF reflections caused by this structure add constructively, resulting in a movable RF short circuit, with mod s/sub 11/ mod >>APX=/-0.3 dB, which can be used to vary the electrical length of a planar tuning stub. The sliding short is used here to produce a 2-dB improvement in the response of a diode detector. This tuning element can be integrated with planar circuits to compensate for the effect of parasitic reactance inherent in various devices including semiconductor diodes and superconductor-insulator-superconductor (SIS) junctions.<
>