A Single-Stage Gain-Boosted Cascode Amplifier With Three-Layer Cascode Feedback Amplifier for Front-End SHA in High-Linearity Pipelined ADC

In this brief, a high-gain and wide-bandwidth single-stage gain-boosted cascode amplifier (GBCA) is proposed for the front-end sample-and-hold amplifier (SHA) in 14-bit 2.5-GS/s pipelined analog-to-digital converter (ADC). This GBCA is composed of a two-layer main cascode amplifier and a three-layer cascode feedback amplifier (FA). The three-layer cascode structure introduces more than 20-dB gain enhancement compared with conventional two-layer FAs. However, adjacent poles appear near the gain bandwidth product (GBW) of the three-layer cascode FA, which may seriously deteriorate the phase margin (PM) of the FA and further prolong the settling time of closed-loop GBCA. A PM expansion technique is proposed to improve the PM of FA by adding a group of switched capacitor array. At the same time, the open-loop GBCA achieves 104-dB direct-current (dc) gain and 65.2-GHz GBW, which satisfies the harsh requirements of the ping-pong interleaved SHA with 12-dB gain on-chip. The pipelined ADC fabricated in 28-nm CMOS process consumes 554 mW at 2.5-GS/s sampling rate, while achieves a signal-to-noise-and-distortion ratio (SNDR) of 52.5 dB and a spurious free dynamic range (SFDR) of 86.4 dBc with 161-MHz input signal.