Robust Traveling Wave-Based Protection Scheme for Multiterminal DC Grids

The DC transmission line protection technology is crucial for the development of multi-terminal Voltage Source Converter (VSC)-based HVDC systems. This article proposes a robust non-unit traveling wave protection (TWP), which deals with the DC fault area identification and fault type discrimination for high impedance fault conditions. The authors applied the traveling wave (TW) reflection and refraction method for the line-mode network. The distinctive features of high-frequency components contained in the line-mode and pole-mode voltage TWs at different relay units are used for the algorithm modeling. Discrete Wavelet Transform (DWT) is selected as the time-frequency analysis tool. The performed simulations are conducted for a four-terminal VSC-HVDC system, and validate the protection feasibility and robustness. More precisely, the proposed protection scheme identifies the internal and external DC faults within 2 ms, and provides correct operation during high-impedance faults (HIF) with a 25 dB level noise interference. This protection scheme makes use of a VSC-assisted resonant current (VARC) direct current circuit breaker (DCCB), that successfully interrupts the fault currents in less than 10 ms after the fault inception. The authors also comprehensively compared the proposed scheme with the existing methods. The obtained results show that the proposed protection scheme is superior in terms of sensitivity and selectivity performance.