Power Optimization of 50 GHz ERSFQ Circuits

The Energy-efficient Rapid Single Flux Quantum (ERSFQ) logic family offers zero-static power dissipation. Any ERSFQ circuit requires a feeding Josephson transmission line (FJTL), a relatively large active transmission line, which serves as an accurate voltage source. For proper operation, the FJTL needs to be continuously pumped at a frequency that is equal to or higher than the highest clock frequency of the ERSFQ circuit. We selected an on-chip pseudo-random binary sequence (PRBS) generator as the example circuit since it naturally facilitates quantitative measurements of operating bias margins in terms of bit error rate (BER). Using external and internal flux pump sources, we performed extensive experimental studies on BER for ERSFQ PRBS generators operating at clock frequencies up to 50 GHz. We paid special attention to the over-pumping regime, where the FJTL pump frequency is higher than the PRBS clock frequency and confirmed its superiority in improving BER. At 35.56 GHz clock frequency, a group of 4 PRBS generators and 4 individual FJTLs with the bias current ratio (BCR) equal to 1, had a BER lower than 10
⁻¹²
and bias margins of ±25% for internal and external flux pump sources over-pumping at 6.25% above clock frequency. The maximal operational clock frequency of a single ERSFQ PRBS generator with intrinsic pump source (+6.25% over-pumping) and BER <10
⁻¹²
was 49.53 GHz. We also focused on optimization of the FJTL's size to reduce the power consumption and the area occupied by the FJTL itself. All chips were fabricated at MIT-Lincoln Laboratory using the SFQ5ee fab node. Future steps required for better understanding of ERSFQ operation are discussed.