Author details

< Back

Dong-Soo Kwon

Also published under: Dong-soo Kwon

Publications

Citations

1,079

Publications by Year

19942012

Co-Authors:

M. AhnR. C. ArkinS. M. BabcockB. L. BurksByoung Dae Jin

Show All Co-Authors (126)

Dong-Soo Kwon

Also published under: Dong-soo Kwon

Affiliation

Human-Robot Interaction Research Center

KAIST

Daejeon, South Korea

Publication Topics

Human-robot Interaction,
Gestures,
Robot Motion,
Robotic Platform,
Robotic System,
Service Robots,
Active Joint,
Attentional Orienting,
Basic Patterns,
Behavioral Patterns,
Changes In Force,
Changes In Parameters

Biography

Dong-Soo Kwon (S'89–M'97) received the B.S. degree in mechanical engineering from Seoul National University, Seoul, Korea in 1980, the M.S. degree in mechanical engineering from Korea Advanced Institute of Science and Technology (KAIST), Seoul, Korea in 1982, and the Ph.D. degree in mechanical engineering from the Georgia Institute of Technology, Atlanta, GA, in 1991.,From 1991 to 1995, he was on the Research Staff at Oak Ridge National Laboratory, Oak Ridge, TN. He is currently an Associate Professor in the Department of Mechanical Engineering, KAIST, Daejon, Korea. His current research interests include medical robots, haptic devices, telerobotics, human-robot interface, entertainment robots, and parallel manipulators.,Dr. Kwon is a membe...

Publications

Citations

1,079

Publications by Year

19942012

Co-Authors:

M. Ahn
R. C. Arkin
S. M. Babcock
B. L. Burks
Byoung Dae Jin

Show All Co-Authors (126)

Author's Published Works

Search History

Showing 1-9 of 9 results

Conferences (6)

Journals (3)

Sort

Filter Results

Show

All Results

Open Access Only

Range
Single Year
Thomas Johnson(9)
Soroush Dehghani(8)
Shahriar Mirabbasi(2)
Sadegh Abbasian(2)
Aaron Clements(2)
School of Engineering, University of British Columbia, Kelowna, BC, Canada(3)
Department of Electrical and Computer Engineering, University of British Columbia, Vancouver, BC, Canada(2)
School of Engineering, The University of British, Columbia, Canada(1)
School of Engineering, The University of British Columbia, Canada(1)
School of Engineering, University of British Columbia, Kelowna, Canada(1)
IEEE Transactions on Microwave Theory and Techniques(2)
2015 IEEE MTT-S International Microwave Symposium(1)
2015 IEEE Wireless Power Transfer Conference (WPTC)(1)
2016 14th IEEE International New Circuits and Systems Conference (NEWCAS)(1)
2016 IEEE MTT-S International Microwave Symposium (IMS)(1)
IEEE(9)
Boulder, CO, USA(1)
Montreal, QC, Canada(1)
Philadelphia, PA, USA(1)
Phoenix, AZ, USA(1)
San Francisco, CA, USA(1)
Rectifier Circuit(7)
Load Resistance(5)
Power Efficiency(5)
RF Input(5)
Dc Supply(3)

Select All on Page

Sort By

Results

A Comparison of GaN Class E Inverter and Synchronous Rectifier Designs for 13.56 MHz, 27.12 MHz and 40.68 MHz ISM Bands

Aaron Clements;Vipul Vishnoi;Soroush Dehghani;Thomas Johnson

2018 IEEE Wireless Power Transfer Conference (WPTC)

Year: 2018 | Conference Paper |

Cited by: Papers (7)

HTML

A comparative study of class-E inverter and synchronous rectifier designs is made for wireless power applications operating in the 13.56 MHz, 27.12 MHz and 40.68 MHz frequency bands. All the designs use the same GaN switch, gate driver, and PCB layout to provide a consistent reference for comparing the performance of the different designs. The synchronous rectifier circuits are designed as circuit...Show More

A Comparison of GaN Class E Inverter and Synchronous Rectifier Designs for 13.56 MHz, 27.12 MHz and 40.68 MHz ISM Bands

Aaron Clements;Vipul Vishnoi;Soroush Dehghani;Thomas Johnson

2018 IEEE Wireless Power Transfer Conference (WPTC)

Year: 2018 | Conference Paper |

An Inverter-Based Bidirectional and Reconfigurable RF Energy Harvesting Circuit with Rectifier and Oscillator Modes

Soroush Dehghani;Aaron Clements;Thomas Johnson

2018 IEEE/MTT-S International Microwave Symposium - IMS

Year: 2018 | Conference Paper |

Cited by: Papers (1)

HTML

A bidirectional circuit that can be reconfigured as a receiver for rectifying RF power for energy harvesting and as a power oscillator for transmission is described. Except for one switch, power flow is completely reversible. The circuit block is compact and suitable for integration in time-division multiplexed wireless sensors. The circuit design is based on the concepts of time-reversal duality ...Show More

An Inverter-Based Bidirectional and Reconfigurable RF Energy Harvesting Circuit with Rectifier and Oscillator Modes

Soroush Dehghani;Aaron Clements;Thomas Johnson

2018 IEEE/MTT-S International Microwave Symposium - IMS

Year: 2018 | Conference Paper |

A 5.8-GHz Bidirectional and Reconfigurable RF Energy Harvesting Circuit With Rectifier and Oscillator Modes

Soroush Dehghani;Shahriar Mirabbasi;Thomas Johnson

IEEE Solid-State Circuits Letters

Year: 2018 | Volume: 1, Issue: 3 | Journal Article |

Cited by: Papers (14)

HTML

A bidirectional circuit that can be reconfigured as a receiver for rectifying radio-frequency (RF) power for energy harvesting, and as a power oscillator for transmission, is proposed. The circuit is compact and suitable for integration in time-division multiplexed wireless sensors. A design concept based on time-reversal duality theory is employed to reuse the same circuit elements for both the o...Show More

A 5.8-GHz Bidirectional and Reconfigurable RF Energy Harvesting Circuit With Rectifier and Oscillator Modes

Soroush Dehghani;Shahriar Mirabbasi;Thomas Johnson

IEEE Solid-State Circuits Letters

Year: 2018 | Volume: 1, Issue: 3 | Journal Article |

Analysis, design, and characterization of wireless power transfer systems using conical coils

Parinaz Hadadtehrani;Soroosh Dehghani;Reza Molavi;Vasudevan Janarthanan;Thomas Johnson;Shahriar Mirabbasi

2016 14th IEEE International New Circuits and Systems Conference (NEWCAS)

Year: 2016 | Conference Paper |

Cited by: Papers (2)

HTML

In this paper, we present the analysis, design, and characterization of wireless power transfer (WPT) systems that use planar and conical coils. It is shown that the conical coils have superior performance in terms of self-resonant frequency and quality factor as compared to their planar coil counterparts. A power transfer efficiency of up to 53.9% is achieved for a 4-coil WPT system employing con...Show More

Analysis, design, and characterization of wireless power transfer systems using conical coils

Parinaz Hadadtehrani;Soroosh Dehghani;Reza Molavi;Vasudevan Janarthanan;Thomas Johnson;Shahriar Mirabbasi

2016 14th IEEE International New Circuits and Systems Conference (NEWCAS)

Year: 2016 | Conference Paper |

Transconductance mode CMOS synchronous rectifier circuits

Soroush Dehghani;Thomas Johnson

2016 IEEE MTT-S International Microwave Symposium (IMS)

Year: 2016 | Conference Paper |

Cited by: Papers (6)

HTML

Two CMOS synchronous rectifiers have been implemented using 0.13 μm technology. Together, the two designs can rectify a 2.4 GHz RF input signal over a 40 dB dynamic range from -30 dBm to +10 dBm. The CMOS rectifiers are designed to operate either as class-B or class-C synchronous rectifiers. In one design, a zero-threshold voltage device is shunted by a positive threshold device to provide rectifi...Show More

Transconductance mode CMOS synchronous rectifier circuits

Soroush Dehghani;Thomas Johnson

2016 IEEE MTT-S International Microwave Symposium (IMS)

Year: 2016 | Conference Paper |

A 2.4-GHz CMOS Class-E Synchronous Rectifier

Soroush Dehghani;Thomas Johnson

IEEE Transactions on Microwave Theory and Techniques

Year: 2016 | Volume: 64, Issue: 5 | Journal Article |

Cited by: Papers (26)

HTML

A class-E synchronous rectifier has been designed and implemented using 0.13-μm CMOS technology. A design methodology based on the theory of time-reversal duality has been used where a class-E amplifier circuit is transformed into a class-E rectifier circuit. The methodology is distinctly different from other CMOS RF rectifier designs which use voltage multiplier techniques. Power losses in the re...Show More

A 2.4-GHz CMOS Class-E Synchronous Rectifier

Soroush Dehghani;Thomas Johnson

IEEE Transactions on Microwave Theory and Techniques

Year: 2016 | Volume: 64, Issue: 5 | Journal Article |

Adjustable Load With Tracking Loop to Improve RF Rectifier Efficiency Under Variable RF Input Power Conditions

Soroush Dehghani;Sadegh Abbasian;Thomas Johnson

IEEE Transactions on Microwave Theory and Techniques

Year: 2016 | Volume: 64, Issue: 2 | Journal Article |

Cited by: Papers (7)

HTML

Terminating an RF rectifier with an optimum load resistance is important to maximize the efficiency of converting RF power to dc power. The optimum load resistance can also vary significantly as a function of RF input power. Therefore, an adjustable load circuit that tracks changes in RF power is required to maximize efficiency. As a way of implementing an adjustable load circuit that can provide ...Show More

Adjustable Load With Tracking Loop to Improve RF Rectifier Efficiency Under Variable RF Input Power Conditions

Soroush Dehghani;Sadegh Abbasian;Thomas Johnson

IEEE Transactions on Microwave Theory and Techniques

Year: 2016 | Volume: 64, Issue: 2 | Journal Article |

2.4 GHz CMOS class D synchronous rectifier

Soroush Dehghani;Thomas Johnson

2015 IEEE MTT-S International Microwave Symposium

Year: 2015 | Conference Paper |

Cited by: Papers (10)

HTML

A CMOS synchronous class D rectifier is implemented in 130 nm technology. The rectifier is designed to operate at 2.4 GHz and requires no external supplies for biasing. The measured RF to DC power efficiency is 30% for an input power of +10 dBm and the power efficiency is greater than 25% over a 12 dB dynamic range from 4-16 dBm. The area of the rectifier is 780 μm by 670 μm including input matchi...Show More

2.4 GHz CMOS class D synchronous rectifier

Soroush Dehghani;Thomas Johnson

2015 IEEE MTT-S International Microwave Symposium

Year: 2015 | Conference Paper |

Tracking load to optimize power efficiency in RF to DC rectifier circuits

Soroush Dehghani;Sadegh Abbasian;Thomas Johnson

2015 IEEE Wireless Power Transfer Conference (WPTC)

Year: 2015 | Conference Paper |

Cited by: Papers (7)

HTML

A tracking load circuit for RF rectifiers is described. The tracking load is designed to maximize RF to DC conversion efficiency as the RF input power to the rectifier changes. The circuit consists of two DC to DC converters with two control loops. The duty cycle of the first stage converter is adjusted by an analog control loop to have an input impedance that is optimum for maximizing the power e...Show More

Tracking load to optimize power efficiency in RF to DC rectifier circuits

Soroush Dehghani;Sadegh Abbasian;Thomas Johnson

2015 IEEE Wireless Power Transfer Conference (WPTC)

Year: 2015 | Conference Paper |

Author details

Dong-Soo Kwon

Dong-Soo Kwon

Affiliation

Publication Topics

Biography

Showing 1-9 of 9 results

Show

A Comparison of GaN Class E Inverter and Synchronous Rectifier Designs for 13.56 MHz, 27.12 MHz and 40.68 MHz ISM Bands

A Comparison of GaN Class E Inverter and Synchronous Rectifier Designs for 13.56 MHz, 27.12 MHz and 40.68 MHz ISM Bands

An Inverter-Based Bidirectional and Reconfigurable RF Energy Harvesting Circuit with Rectifier and Oscillator Modes

An Inverter-Based Bidirectional and Reconfigurable RF Energy Harvesting Circuit with Rectifier and Oscillator Modes

A 5.8-GHz Bidirectional and Reconfigurable RF Energy Harvesting Circuit With Rectifier and Oscillator Modes

A 5.8-GHz Bidirectional and Reconfigurable RF Energy Harvesting Circuit With Rectifier and Oscillator Modes

Analysis, design, and characterization of wireless power transfer systems using conical coils

Analysis, design, and characterization of wireless power transfer systems using conical coils

Transconductance mode CMOS synchronous rectifier circuits

Transconductance mode CMOS synchronous rectifier circuits

A 2.4-GHz CMOS Class-E Synchronous Rectifier

A 2.4-GHz CMOS Class-E Synchronous Rectifier

Adjustable Load With Tracking Loop to Improve RF Rectifier Efficiency Under Variable RF Input Power Conditions

Adjustable Load With Tracking Loop to Improve RF Rectifier Efficiency Under Variable RF Input Power Conditions

2.4 GHz CMOS class D synchronous rectifier

2.4 GHz CMOS class D synchronous rectifier

Tracking load to optimize power efficiency in RF to DC rectifier circuits

Tracking load to optimize power efficiency in RF to DC rectifier circuits

IEEE Account

Purchase Details

Profile Information

Need Help?