A 156pW Gate-Leakage Based Voltage/Current Reference for Low-Power IoT Systems

The paper presents a sub-nW gate-leakage based voltage and current reference in a single circuit whose reference values are scalable and doesn’t incorporate start-up circuits or resistors in the architecture. The power consumption of the proposed circuit increases by only 2.1x in the temperature range of -55°C to 100°C, unlike conventional voltage/current references where the power consumption increases exponentially w.r.t temperature. Implemented in 90nm technology, the proposed voltage reference (current reference) achieves post-trim typical accuracy of 22ppm/°C(58ppm/°C) and worst-case accuracy of 71ppm/°C(78ppm/°C). Excellent line sensitivities of 0.029%/V and 0.059%/V are observed for voltage and current reference respectively, in a supply range of 1V - 3V. Without any start-up circuit, the observed 99% settling times for voltage and current reference are 1.92ms and 2.526ms respectively. The area occupied by the total circuit is 0.0015mm
²
, while the power consumption is 156pW at typical corner, 27°C and 1V supply.