Investigation on surface Temperature of Vegetable oil of 3-Phase Transformer using Nano Particles

Transformer is an unvarying power equipment, which transfer electric power from generating station to load with increasing or decreasing for the value of voltage or current without any change in frequency. This is a serial experiment for the thermic state of high powered equipment that can outnumber the probability for the vandalism caused due to hot spot. Dependability of the energy system is the crucial heed in any current supply network and is accomplished by genuine performance of all the high powered equipment with the transformer. Adequate performance of the static devise are impaired with recurrent failure in insulation, so it needs a major thrive new resistant material with enhanced snug properties, so the recurrently used resistant element is the transformer insulating oil, which act as duplex intention of insulation and as well as coolant.so scrutinizations are engrossed towards burgeoning of the transformer oil with nano fillers using measurable aid which is COMSOL 5.6. COMSOL Multiphysics enables you to simulate electromagnetics, structural behaviour, acoustics, fluid flow, heat distribution, and chemical phenomena in one environment, following one workflow. Investigation is being carried out to analyse the surface temperature of transformer insulting oil (vegetable oil) with and without nano fillers for distribution in insulating oil with the nano filler for the recommended operation of transformer. The stimulation results have also been described below.