Effectiveness Improvement of Offset Pulse Position Modulation System Using Reed-Solomon Codes

Currently, the pulse position modulation (PPM) schemes are suffering from bandwidth application where the line rate is double that of the initial data rate. Thus, the offset pulse position modulation (OPPM) has been suggested to rectify this concern. Several attempts to improve the OPPM can be found in the open literature. This study focuses on the utilization of Reed Solomon (RS) codes to enhance the forward error correction (FEC) bit error rate, which is not yet explored. The performance of errors of the uncoded OPPM was compared to the one used by RS coded OPPM using the number of photons per pulse, the transmission's efficacy, and bandwidth growth. The results demonstrate that employing FEC coding would increase the system's error performance especially when the RS is operating at its finest settings. Specifically, when operating with a capacity that is equivalent to or even more 0.7, the OPPM with RS code outperforms the uncoded OPPM where the OPPM with MLSD needs only 1.2×10
³
photons per pulse with an ideal coding rate of about 3/4.